Event/Alarm Actions - Sony NSR Series User'smanual

Apply
This saves the settings.
Cancel
This cancels the changes to the settings.

Event/Alarm Actions

An action is performed if an alarm or event occurs within
the duration set for a schedule. An action can be performed
each time an alarm or event occurs, provided it occurs
within the duration.
Caution
Even if the state changes as a result of an action being
performing, the original state is not restored automatically.
Event/Alarm Action Example:
When an event/alarm action for moving the preset position
to "Preset 2" if motion is detected by the VMD (camera)
pin of camera 1:
0
Alarm Recording Schedule
Preset 2 Preset 2 Preset 1
1 When the VMD (camera) pin detects motion, the
action is performed and the preset position of camera
1 moves to "Preset 2."
2 The preset position is returned to "Preset 1" manually.
3 When the VMD (camera) pin detects motion within
the duration, the action is performed again and the
preset position of camera 1 moves to "Preset 2."
Registering an Event/Alarm Action
Configure a schedule for performing an action when an
alarm or event occurs within the duration set for the
schedule. An action can be performed each time an alarm
or event occurs, provided it occurs within the duration.
1
Click [Schedule] at the top of the Configuration
window.
The Schedule Configuration screen appears.
2
Switch to recurrent view or date view.
12 24
Preset 2
3
Select [Action] in the tree, and select [New Action].
The New Action dialog box appears.
4
Configure each item, and click [OK].
1 2
5
For details on each of the items, refer to "Setting Items
of New Action Dialog Box (Event/Alarm Action)"
(page 96).
1 Select [Event/Alarm Action].
2 Enter a name for the event/alarm action.
3 Select the check boxes for the days you want to run
the event/alarm action, and configure a start time
and end time for the event/alarm action.
4 Configure the timing for ending the action.
5 Configure the event that will be the trigger for the
action.
6 Configure the action to perform.
7 Click [OK].
The event/alarm action is created.
5
Click [Apply].
The event/alarm action is saved.
For details on how to view the schedule, refer to "Setting
Items of Schedule Screen" (page 83).
3
4
6
7
95
Configuring Action Settings