Sony NSR Series User'smanual page 41

Device List
This displays a list of the devices detected with the
automatic search.
Register
Select the check boxes of the devices to register to
NSR.
Model
This displays the type of device.
User
Enter the user name for connecting to the device.
Password
Enter the password for connecting to the device.
IP Address
This displays the IP address of the device.
Port
This displays the port number on the device side for
when connecting with the device.
The default setting is "80."
Serial No.
This displays the serial number of the device.
MAC Address
This displays the MAC address of the device.
Network
This displays the network in which the device is
corrected.
Status
This displays the current status of the device.
Caution
The user name and password for connecting to a
device cannot be changed from NSR. To change them,
access the camera directly from a Web browser on a
computer. If the user name and password for the
administrator of a registered camera are changed, the
NSR settings also need to be changed.
Registration
This registers the devices with check marks to NSR, and
closes the dialog box.
Cancel
This cancels the registration and close the dialog box.
Setting Items of Input All Dialog Box
This dialog box allows you to configure the following
items simultaneously when registering devices detected
with the automatic search.
It is displayed by clicking [Input All] in the Multiple
Camera Registration dialog box (page 40).
Select the check boxes of the items you want to set, enter
the setting values, and click [OK].
User
Enter the user name for connecting to the device. It can be
up to 32 characters and consist of alphanumeric characters
and some symbols (periods (.), hyphens (-), underscores
(_)).
Password
Enter the password for connecting to the device. It can be
up to 32 characters and consist of alphanumeric characters
and some symbols (periods (.), hyphens (-), underscores
(_)).
IP Address
Enter the IP address for the device.
You can also register multiple devices simultaneously. In
such a case, the value of the IP address you entered
becomes the beginning address.
Port No.
Enter the port number on the device side for when
connecting with the device.
The default setting is "80."
OK
This reflects the setting values in the device list of the
Multiple Camera Registration dialog box, and closes the
dialog box.
Cancel
This cancels your settings, and closes the dialog box.
41
Registering Devices