Table of Contents
Advertisement
1 Click [Add].
The logical sensor input pin is added to the list.
2 Configure each item.
3 Click [Apply].
The logical sensor input pin is added.
Deleting Logical Sensor Input Pins
Created for NSR
Note
The physical sensor input pins of NSR that exist by default
cannot be deleted.
1
Open [IO Device] in the [Device] tree, and click to
select [System I/O].
2
Select the check boxes for the logical sensor input pins
you want to delete in the [Logical Sensor In] tab, and
click [Delete].
A confirmation message appears.
3
Click [Yes].
The logical sensor input pin is deleted.
88
Configuring Sensor Inputs
Setting Items of the [Logical Sensor
In] Tab
You can configure sensor input pins.
After configuring each item, click [Apply] to save your
settings.
This example describes the screen for configuring physical
sensor input pins of the NSR.
Sensor Input Pin List
This displays a list of the sensor input pins configured for
the device selected in the tree structure.
Enable
Select the check boxes to enable the pins for the sensor
inputs.
No
This displays the numbers of the sensor input pins.
This item cannot be changed.
Name
Enter the names of the sensor inputs.
Pulse
Enter the duration in milliseconds to sustain pulse
input once it is turned on.
Invert
Select the check box to invert the pulse polarity.
Example: Invert High → Low to Low → High.
Add
This adds a logical sensor input pin to the list.
This item is only displayed for the logical sensor inputs of
"System IO."
Delete
This deletes the selected sensor input pin from the list.
This item is only displayed for the logical sensor inputs of
"System IO."
Advertisement
Table of Contents
