Table of Contents
Advertisement
6
Check the displayed setting values, and click [Finish].
In the case of schedule recording, setting values
corresponding to the storage period configured in Step
4 appear.
In the case of alarm recording, preset values appear.
The automatic recording schedule is configured for all
cameras.
You can confirm details of the configuration in the
Schedule Configuration screen.
Configuring Schedules Manually
You can manually configure the durations for performing
schedule recording, alarm recording, and event recording.
Note
For details on settings such as the codec and frame rate for
images captured from the camera during schedule
recording, alarm recording, or event recording, refer to
"Configuring Camera Video Settings" (page 43).
Configuring Recurrent Schedules
You can configure a recurrent schedule to repeat a
schedule weekly.
1
Select the camera or group for which you want to
configure the schedule from the [Schedule] tree of the
Schedule screen.
You can also select multiple cameras at once by
holding down the Shift key or Ctrl key while selecting.
2
Click [Recurrent] to switch to recurrent view, and
click [New Record].
The New Record dialog box appears.
3
Configure each item, and click [OK].
The setting items differ depending on the type of
schedule.
Screen example: When schedule recording
2
1
For details on each of the items, refer to "Setting Items
of New Record Dialog Box" (page 84).
1 Enter a name for the schedule.
2 Select the type of schedule.
3 Select the check boxes for the days you want to run
the schedule, and configure a start time and end
time for the schedule.
4 Configure each item, as necessary.
For details on the setting procedure for alarm
recording and event recording, refer to
"Configuring Alarm Recording and Event
Recording" (page 81).
5 Click [OK].
The schedule is created.
4
Click [Apply].
The schedule is saved.
3
4
5
Configuring Recording Schedules
79
Advertisement
Table of Contents
