Assigning Cameras To Monitor Frames; Configuring A Second Monitor - Sony NSR Series User'smanual

Setting Items of Insert Image Dialog Box
This dialog box allows you to set the image file to insert.
It is displayed by clicking
Configuration screen (page 52).
After configuring each item, click [OK].
Location
Select the media containing the image file, and select the
image file.
When you select the media, a list of the stored image files
appears.
Preview
This displays a preview of the image file selected in the
list.
OK
This inserts the selected image, and closes the dialog box.
Cancel
This cancels your settings, and closes the dialog box.
on the Layout
Assigning Cameras to Monitor
Frames
Assign a camera for displaying images to each monitor
frame.
1
Select a layout from the [Layout] tree on the Layout
Configuration screen.
2
Assign the cameras to monitor frames.
The following methods are available for assigning
cameras.
• Drag and drop a camera from the [Device] tree to a
monitor frame.
• Select a monitor frame, and select a camera from the
[General] tab at the bottom of the screen.

Configuring a Second Monitor

When a second monitor is installed, select the layout to use
for the second monitor and configure settings related to
monitor frames.
A second monitor can only be used as the hotspot monitor.
Note
The 1×1, 2×2, 3×2, and 3×3 layouts are provided in
advance for a second monitor. It is not possible to assign
cameras, change monitor frames, etc.
1
Select "2nd Display" from the [Layout] tree on the
Layout Configuration screen.
Settings Related to Monitoring
57