System Requirements - Sony NSR Series User'smanual

G HDMI monitor connectors (1 and 2)
Use these connectors to connect monitors that support
HDMI input.
HDMI monitor connector 1 and L monitor connector
1 (and monitor connector 1 on the front of the unit)
cannot be used at the same time, while HDMI monitor
connector 2 and L monitor connector 2 cannot be
used at the same time.
H Audio input connector (Used for future expansion)
Use this connector to input audio from a peripheral
audio device, such as a microphone.
Plug-In Power microphones are supported.
I Mini-SAS output connector
Use this connector to connect the mini-SAS cable used
for connecting an NSRE-S200.
The NSRE-S200 is an optional expansion storage unit.
J USB connector
Use this connector to connect a USB keyboard, USB
mouse, or USB flash memory to the NSR.
K LAN connectors (1 to 4)
Use these connectors to connect 10 Base-T, 100 Base-
TX, or 1000 Base-T network cables.
LAN1: Network cameras
LAN2: Remote Clients
LAN3: Used for future expansion
LAN4: Used for future expansion
L Monitor connectors (1 and 2)
Use these connectors to connect a monitor.
Monitor connector 1 (and monitor connector 1 on the
front of the unit) and H HDMI monitor connector 1
cannot be used at the same time, while monitor
connector 2 and H HDMI monitor connector 2 cannot
be used at the same time.
M Audio output connectors (L and R)
Use these connectors to output audio to a peripheral
audio device.
N Power supply connector
Use this connector to connect the power cord.
O Analog camera cable input connector
Use this connector to connect analog cameras via the
analog camera input cable.
The NSR-1050H is standard equipped with this
connector, but the NSR-1200/1100 requires an NSBK-
A16 (optional) expansion.
10

System Requirements

System Requirements
The hardware required in order to use this recorder are as
follows.
• Sony Network cameras
Contact your dealer for details about compatible Sony
network cameras.
1)
• Monitor
2)
• USB keyboard
3)
• USB mouse
4)
• USB remote controller
• Network switch
• 1000Base-T/100Base-TX/10Base-T cable
5)
• USB memory device
1) This unit supports HDMI-compatible devices and computer
displays that support RGB input.
The following resolutions can be specified.
- Full High-Definition (1,920 × 1,080)
- WUXGA (1,920 × 1,200)
- Full Wide XGA (1,360 × 768)
- UXGA (1,600 × 1,200)
- SXGA (1,280 × 1,024)
- XGA (1,024 × 768)
2) Use a USB keyboard with a cable. However, keys other than
the standard may not function. Wireless or infrared USB
keyboards may also not function properly.
3) Use a USB mouse with a cable. However, three-button or
wheel mice may not function properly. Wireless or infrared
USB mice may also not function properly.
4) You can use a remote controller to control pan, tilt, and zoom
operations for cameras.
- This unit supports IP Desktop USB controllers from CH
Products. Other remote controllers are not supported.
5) Required when backing up system information such as logs.
- This unit supports standard USB 2.0 Mass Storage devices.
Depending on the type of USB 2.0 Mass Storage device,
however, errors may occur when writing data to the device.
If errors occur when writing data, use a USB memory
device of a different type.
Note
When using displays that support both HDMI and RGB
input, we recommend using RGB input.