Table of Contents
Advertisement
xSetting Items of SAS Disk List Screen
Select the NSRE-S200 for which you want to configure the
partition settings, and click [Partition]. When you have
finished configuring the settings, click [OK].
(This screen is only displayed when an NSRE-S200 is
connected.)
Caution
When an NSRE-S200 is connected, use a UPS.
xSetting Items of SAS Disk Partition Screen
Configure the partitions of the internal hard disk drive of
NSRE-S200, and click [OK].
Capacity
This displays the capacity of the internal hard disk drive.
Number of Partitions
Select the number of partitions.
Partition1 [data1-1]
Select the size to allocate each partition as a percentage.
xSetting Items of Disk Uninstallation Screen
Select the hard disk drive you want to delete, and click
[Uninstall]. When you have finished configuring the
settings, click [OK].
If you uninstall a hard disk, all of the data on the hard disk
will be deleted.
Caution
In particular, if you uninstall a hard disk drive that has
multiple partitions, multiple logical volumes registered on
the [Storage] tab of the Server Configuration screen will be
deleted automatically. Before you uninstall a hard disk,
check the [Storage] tab to confirm whether it is alright to
delete the registered storage.
For details on the [Storage] tab of servers, refer to
"Configuring Settings Related to Storage" (page 70).
Setting Items of FTP Screen
Configure each of the items when you want to enable the
FTP server, and click [OK].
Enable user to Get Data from Remote
Select the check box to enable remote client downloading
of recorded data using FTP.
If you select this check box, set the password.
User Name
This displays the user name. The user name is
"ftpupdate."
It cannot be changed.
Password
Enter the password.
Changing Initial Settings with the Setup Menu
17
Advertisement
Table of Contents
