9-Pin Control Interface Board (Optional) - Sony NSS-V2 Operation Manual

b REMOTE connector (D-sub 9-pin, conforming to
RS-422A standards)
Used to control the output signal of each port. Connect it to
the RS-422A connector on an external control unit.
c SDI OUT connectors 1/2 (BNC type)
Output connector for serial digital video/audio.
When the BZNA-203 processing board is installed, it
becomes an output connector for HD serial digital video/
audio. The same signal is output from both SDI connectors
1 and 2.
BKNS-V209 9-pin Control Interface
Board (Optional)
REMOTE
1 2
REMOTE connector 2
REMOTE connector 1
REMOTE connectors (D-sub 9-pin, conforming to RS-
422A standards)
Used for Jog and Shuttle control over the output signal of
each port.
Connect to the RS-422A connector on an external Jog/
Shuttle control unit. With some setups, you can set which
output port is controlled.
The REMOTE 2 connector is only enabled with the unit is
inserted in SLOT10.
24
Names and Functions of Parts