Configuring Camera Operations; Configuring Preset Positions - Sony NSR Series User'smanual

Frame Rate
Select the frame rate for images captured from the
camera.
Monitoring
Configure settings related to images for when monitoring.
Codec
Set the image codec for the camera. Select JPEG or
MPEG4.
Image Size
Select the resolution for the camera.
Image Quality (for JPEG)
Select the image quality for images captured from the
camera.
Bit Rate (for MPEG4)
Select the bit rate for images captured from the
camera.
Frame Rate
Select the frame rate for images captured from the
camera.
Light Funnel
Select the mode to use when the camera has a light funnel
function.
Note
The light funnel function may not be able to be used
depending on the conditions. For details, check the user's
guide for the camera.
Threshold
Select the brightness for when to switch to night mode.
Hold Time
Select the time for responding to changes in
brightness.
44

Configuring Camera Operations

Configuring Camera
Operations
In NSR, you can configure the following settings for
camera operations.
• "Configuring Preset Positions" (page 44)
You can configure preset positions for the camera.
• "Configuring Camera Tours" (page 45)
You can configure camera tours for sequentially moving
a camera to the pan, tilt, and zoom positions specified for
presets.
• "Configuring Masks" (page 46)
You can configure the areas to mask for the camera.
• "Configuring Control Protocol of Analog Camera"
(page 48)
You can configure settings for controlling the pan, tilt,
and zoom on an analog camera.

Configuring Preset Positions

This section describes configuring camera preset
positions.
These settings are only available for cameras with a
function for configuring preset positions. The items and
buttons on the [Preset] tab are unavailable for cameras
without a function for configuring preset positions.
Configuring a New Preset Position
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the camera for which you want to configure the
preset position, and click the [Preset] tab.
Images from the camera are displayed in the preview
area.