Connecting the Power Cord ......16 copyright law. • Sony assumes no responsibility for damages, loss of income, or any Connecting to a Network ......... 17 claims from a third party arising out of use of the recorder or supplied soft- Connecting an Analog Camera ......
Use the unit in a horizontal position Usage Precautions • The unit is designed to be operated in a horizontal position. • Do not install the unit on a slanted surface, and protect Important Information About Safety the unit from shocks. •...
Values are based • To ensure proper operation of USB devices, do not on Sony measurements. These values are not guaranteed, as connect the devices via a USB hub. Connect the performance may change due to the user’s operating environment.
• Sony Network cameras (error correcting codes) onto more than one hard disk drive. Although this system allows continued operation should Contact your dealer for details about compatible Sony one of the hard disks malfunction, it does not guarantee network cameras.
Package Contents Downloading Files Stored on the NSR Check that the following items are included in this package: Documents, such as operating manuals, and tools are NSR-1200/1100 stored on the NSR unit. Perform the following to • NSR-1200/1100 Surveillance Recording Server (1) download files stored on the NSR unit.
Using the PDF Manual The NSR stores operation manuals and other documents (Japanese, English, French, German, Italian, Spanish, Simplified Chinese and Russian versions). The copies of these manuals are created in pdf (Portable Document Format). Preparations The following software must be installed on your computer in order to use the operation manuals stored on the NSR.
Features and Functions Front (When the Cover is Opened) NSR-1200/1100/1050H POWER NETWORK STATUS ERROR H USB connector A Power LED Lights green when the unit is turned on. Use this connector to connect a USB keyboard, mouse, Lights amber when it is on standby. or USB flash memory to the NSR.
Rear NSR-1200/1100 NSR-1050H A Fan E Sensor input connector Take care not to obstruct the fan grille. If the grille is Use this connector to connect the sensor input lines. obstructed, heat may build up in the unit, leading to For connection details and wiring diagrams for sensor damage and/or fire.
H Audio input connector Reference Data for Use this connector to input audio from a peripheral audio device, such as a microphone. Installation Plug-In Power microphones are supported. I Mini-SAS output connector Use this connector to connect the mini-SAS cable used Current Consumption and Inrush for connecting an NSRE-S200.
When the front bezel is opened Step 1: Installation 19.4 in. (494 mm) 4.6 in. Before setting up, be sure that the location for (117 mm) installation provides sufficient space and strength to 4.2 in. 14.8 in. (377 mm) (106 mm) support the unit.
Preparing the NSR Rack Mount Installation Use the supplied fasteners and screws to install the inner Install the NSR in a rack using the optional rack rail on the NSR. mounting kit (sold separately). Use the supplied flat head screws to attach the Warning mounting ears to the front of the side panel.
Page 14
Install the rails on the rack. Lift the NSR, fit the inner rails into the slide rail (1) Adjust the length of the rails to match the length grooves (white), and then slide the assembly until it of your rack. stops.
Installing Optional Accessories For details on installing an NSRE-S200, refer to the operating instructions supplied with the NSRE-S200. For details on installing an NSBK-A16, contact your Monitor connector 1 Sony dealer. Monitor 1 Monitor 2 Monitor connector 1 Monitor connector 2...
Recommended connector use while operating Connecting the Keyboard, Mouse the unit and Remote Control Unit Monitor Connectors to use Connect the devices to the USB connectors on the front HDMI HDMI Analog Analog monitor monitor and rear of the unit. connector connector monitor...
NSR” (page 6). You can also download the installer for the latest version of RealShot Manager Advanced from the following URL. http://www.sony.co.jp/net/Products/RSMAd/license_form.html For details on installation and connecting to the NSR, refer to the RealShot Manager Advanced Installation Guide (PDF).
Connecting an Analog Camera Caution Connect the analog camera using the supplied analog When using cameras and power supply units that camera input cable. superimpose DC voltage on the video coaxial cable, pay To control pan, tilt, and zoom operations, connect a close attention to the coaxial cable wiring.
Connecting the NSR-1200/1100/1050H to the Connect the NSR to the UPS with the dedicated serial NSRE-S200 cable to the serial connector on the rear of the NSR. Mini-SAS output Serial cable Mini-SAS cable connector Power cord To Power source Connecting an Audio Output Device Mini-SAS input Connect the audio output device to the audio output connector...
To turn off the unit Step 3: Settings After logging on to NSR, click at the top of the “Main” screen, and select [Shutdown] from the menu This section provides information on how to turn on the that appears. unit, and general explanations on how to register cameras and other devices.
Page 21
Read the user license agreement carefully, click Set the date and time, and click [Next]. [Accept], and then click [Next]. • When you select the [Enable NTP Server] check box, the unit acts as the NTP server for date and time synchronization.
Page 22
Set the IP address for LAN connector 2, and click Configure settings for monitor 1, and click [Next]. [Next]. • If you select [Auto], the type of monitor connected and its resolution are detected and configured automatically. For details on supported resolutions, see “System Requirements”...
Page 23
Configure partitions for the internal hard disk drive, and Select the video format for the analog cameras to be click [Next]. connected, and click [Next]. Specify the number of partitions, and select the (This screen only appears when an NSR-1050H or percentage of total the capacity to assign each partition.
To access the Setup Menu from the logon Performing Basic Configuration screen This section describes how to register and configure Click [Administration Menu]. alarm recording for devices that are automatically detected. For details on how to register all automatically detected devices at once, refer to the First Step Guide (separate document).
Page 25
The cameras are registered. When configuration is complete, the “Main” screen appears. ↓ After performing basic configuration, the values for To configure alarm recording each setting will be as follows. Select [Automatic Alarm Record], and click [Next]. Setting Scheduled Alarm recording recording Image size Maximum image size supported by the camera.
Caution Note • If schedule recording and alarm recording settings To configure these settings, you must configure the already exist when you execute “automatic record,” transmission mode in the “Serial Port” settings of the the automatic configurations replace the previous Setup Wizard beforehand.
Create a user in the master server. Step 4: Verifying Click (add) in the User Configuration screen, and create a user. Operation After basic configurations are finished, make sure that camera images are displayed in the “Main” screen and verify other such operations. 1 Change the layout and display images from registered cameras.
Caution Connection Examples When you connect a USB device to the unit, the [ERROR] lamp at the bottom right of the “Main” screen may light. This indicates that the unit may not support Monitor Connection Examples the USB device. For details see “Usage Precautions” (page 3) or “An external device connected to a USB This unit supports several combinations of monitor connector does not work.”...
NSRE-S200 Connection Example Notes • Do not connect the monitors to HDMI monitor You can connect up to seven optional NSRE-S200 units connectors 1 and 2. to the NSR-1200/1100/1050H in the following tree • Do not connect a monitor to monitor connector 1 on configurations.
Miscellaneous STATUS LED When an error occurs with the unit, the ERROR LED on the front panel of the unit flashes or lights depending on the error status, and the STATUS LED lights. STATUS ERROR The STATUS LED indicates the following error situations. Error codes displayed during boot stage Error codes displayed during operation stage (The ERROR LED blinks when an error occurs...
RS-422/485 I/O Port Pin NO. RS-422 RS-485 Pin Assignment of I/O Port Sensor In Pin NO. SENSOR IN 3.3 v Using the I/O Receptacle IN_8 – Insert a small slotted screwdriver into the upper or lower IN_8 + slot of the hole you want to connect a wire to (AWG No. IN_7 –...
Wiring Diagram 2 for Sensor Input Troubleshooting Inside of this unit Outside Before contacting your retailer or a Sony Support Center, please check the following items. If the problem 1 pin (VDD) (200 mA max) persists, contact them. 3, 5, 7, 9, 11, 13, 15,...
Page 33
The monitor remains blank. devices directly to the USB connectors on the unit. Operation is not guaranteed when devices are • Verify whether the NSR is on. connected via a USB hub, USB switch, or extension • Verify whether the power cord is correctly connected. cable.
SUCH DAMAGES. Article 3. FUNCTION ADDITION Article 6. TERMINATION In case that you are granted by SONY the right to SONY may terminate this EULA if you fail to remove a functional restriction implemented in the comply with any of the terms and conditions of this Software or add a function to the Software, by your EULA.
“Downloading Files Stored on the NSR” (page 6). Preamble Do not direct questions to Sony regarding the contents of the source code. The licenses for most software are designed to take away your freedom to share and change it. By contrast, the...
Also, for each author’s protection and ours, we want to You may charge a fee for the physical act of transferring make certain that everyone understands that there is no a copy, and you may at your option offer warranty warranty for this free software.
Page 37
medium does not bring the other work under the scope License will not have their licenses terminated so of this License. long as such parties remain in full compliance. You may copy and distribute the Program (or a You are not required to accept this License, since work based on it, under Section 2) in object code or you have not signed it.
Page 38
decide if he or she is willing to distribute software NO WARRANTY through any other system and a licensee cannot impose 11. BECAUSE THE PROGRAM IS LICENSED that choice. FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE This section is intended to make thoroughly clear what EXTENT PERMITTED BY APPLICABLE LAW.
something other than `show w' and `show c'; they could END OF TERMS AND even be mouse-clicks or menu items--whatever suits your program. CONDITIONS You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer”...
with the library after making changes to the library and GNU LESSER GENERAL recompiling it. And you must show them these terms so they know their rights. PUBLIC LICENSE We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, Version 2.1, February 1999 which gives you legal permission to copy, distribute and/ or modify the library.
the library. A more frequent case is that a free library complete source code means all the source code for all does the same job as widely used non-free libraries. In modules it contains, plus any associated interface this case, there is little to gain by limiting the free library definition files, plus the scripts used to control to free software only, so we use the Lesser General compilation and installation of the library.
Page 42
table used by this function must be optional: if the If distribution of object code is made by offering access application does not supply it, the square root function to copy from a designated place, then offering equivalent must still compute square roots.) access to copy the source code from the same place satisfies the requirement to distribute the source code, These requirements apply to the modified work as a...
Page 43
and its use are covered by this License. You must supply It may happen that this requirement contradicts the a copy of this License. If the work during execution license restrictions of other proprietary libraries that do displays copyright notices, you must include the not normally accompany the operating system.
Page 44
11. If, as a consequence of a court judgment or option of following the terms and conditions either of allegation of patent infringement or for any other that version or of any later version published by the Free reason (not limited to patent issues), conditions are Software Foundation.
Yoyodyne, Inc., hereby disclaims all copyright interest END OF TERMS AND in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. CONDITIONS <signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice How to Apply These Terms to Your That’s all there is to it! New Libraries If you develop a new library, and you want it to be of the...
• Always make a test recording, and verify that it was Audio output (L) (1) recorded successfully. Audio output (R) (1) SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY Audio input (1) KIND INCLUDING, BUT NOT LIMITED TO, LAN (1000Base-T/100Base-TX/10Base-T)
NSRE-S200 の接続例 NSR-1200/1100/1050H では、以下のようなツリー構 成で、別売の NSRE-S200 を 7 台まで接続できます。 メモ 接続に使用するミニ SAS ケーブルは、NSRE-S200 に付 属されています。 NSRE-S200 の増設は、以下の順番で行ってください。 NSR-1200/1100/1050H POWER NETWORK STATUS ERROR NSRE-S200 POWER NETWORK STATUS ERROR NSRE-S200 POWER NETWORK STATUS ERROR POWER NETWORK STATUS ERROR POWER NETWORK STATUS ERROR POWER NETWORK STATUS...
その他 STATUS LED の見かた 本機にエラーが発生すると、前面の ERROR LED が状況に応じて点滅または点灯し、STATUS LED は点灯します。 STATUS ERROR STATUS LED では、以下のようにエラーの状況を示します。 起動中のエラー 作動中のエラー (起動中にエラーが発生すると、ERROR LED が点滅します) (作動中にエラーが発生すると、ERROR LED が点灯します) エラー STATUS LED ERROR 考えられる原因 エラー STATUS LED ERROR 考えられる原因 コード コード 点滅 電圧供給に問題があります。 点灯 温度が上昇しました。 1 2 3 4 1 2 3 4 CPU ファンに問題がありま...
第7条(一般条項) GNU GENERAL 1.本契約は、日本国法に従い解釈されるものとします。 2.お客様は、許諾ソフトウェアに適用される一切の輸出 PUBLIC LICENSE 管理規制に関する法律、規則及び条約に従うことに同 意するものとします。 3.本契約の条件は、分割可能なものです。本契約のいず Version 2, June 1991 れかの条項が、本契約が実施されるある管轄において 無効もしくは執行不能とされた場合であっても、当該 Copyright (C) 1989, 1991 Free Software 条項以外は有効に存続し、執行可能なものとします。 Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA GPL/LGPL について Everyone is permitted to copy and distribute verbatim copies of this license document, but 本製品は、GPL/LGPL 適用ソフトウェアを含みます。し...
source code. And you must show them these terms is not restricted, and the output from the Program is so they know their rights. covered only if its contents constitute a work based on the Program (independent of having been made We protect your rights with two steps: (1) copyright by running the Program).
Page 89
Program is not required to print an corresponding source code. (This announcement.) alternative is allowed only for noncommercial distribution and only if you These requirements apply to the modified work as a received the program in object code or whole. If identifiable sections of that work are not executable form with such an offer, in derived from the Program, and can be reasonably accord with Subsection b above.)
Page 90
Each time you redistribute the Program (or any This section is intended to make thoroughly clear work based on the Program), the recipient what is believed to be a consequence of the rest of automatically receives a license from the this License.
NO WARRANTY END OF TERMS AND 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR CONDITIONS THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE How to Apply These Terms to COPYRIGHT HOLDERS AND/OR OTHER Your New Programs PARTIES PROVIDE THE PROGRAM "AS IS"...
Gnomovision version 69, Copyright (C) year name GNU LESSER of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. GENERAL PUBLIC This is free software, and you are welcome to redistribute it under certain conditions; type LICENSE `show c' for details.
Page 93
To protect your rights, we need to make restrictions derivative of the original library. The ordinary that forbid distributors to deny you these rights or to General Public License therefore permits such ask you to surrender these rights. These restrictions linking only if the entire combination fits its criteria translate to certain responsibilities for you if you of freedom.
disclaimer of warranty; keep intact all the TERMS AND CONDITIONS FOR notices that refer to this License and to the COPYING, DISTRIBUTION AND absence of any warranty; and distribute a copy MODIFICATION of this License along with the Library. This License Agreement applies to any software You may charge a fee for the physical act of library or other program which contains a transferring a copy, and you may at your option...
Page 95
when you distribute the same sections as part of If distribution of object code is made by offering a whole which is a work based on the Library, access to copy from a designated place, then the distribution of the whole must be on the offering equivalent access to copy the source code terms of this License, whose permissions for from the same place satisfies the requirement to...
Page 96
Library" with the Library to produce a work than the cost of performing this containing portions of the Library, and distribution. distribute that work under terms of your choice, If distribution of the work is made by provided that the terms permit modification of offering access to copy from a designated the work for the customer's own use and place, offer equivalent access to copy the...
Page 97
You may not copy, modify, sublicense, link with, and this License would be to refrain entirely or distribute the Library except as expressly from distribution of the Library. provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, If any portion of this section is held invalid or or distribute the Library is void, and will unenforceable under any particular circumstance,...
Page 98
version published by the Free Software Foundation. YOU OR THIRD PARTIES OR A FAILURE OF If the Library does not specify a license version THE LIBRARY TO OPERATE WITH ANY number, you may choose any version ever OTHER SOFTWARE), EVEN IF SUCH HOLDER published by the Free Software Foundation.
You should also get your employer (if you work as a END OF TERMS AND programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. CONDITIONS Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright How to Apply These Terms to interest in the library `Frob' (a library for tweaking knobs) written by James Random...
ミニ SAS 出力(別売の NSRE-S200 接続用、 仕様 Mini SAS x4 (SFF-8088) 、3.0 Gbit/s) (1) センサー入力(DC 3.3 V ~ 24 V デバイス対 応、フォトカップラー入力、本体とは電気 NSR-1200/1100/1050H 的に絶縁) (8) アラーム出力(最大 DC24 V、1 A) プロセッサー (メカニカルリレー出力、本体とは電気的に NSR-1200:Quad Core Xeon 絶縁) (8) NSR-1100:Dual Core Xeon UPS 用シリアル端子:RS-232C(1) NSR-1050H:Dual Core Xeon アナログカメラコントロール用端子(NSR- 1050H および...
Page 101
Etape 3 : Réglages ..........119 • Sony décline toute responsabilité pour des dommages, des pertes de re- Mise sous tension de l’appareil ...... 119 venu, ou toute réclamation d’une tierce partie provenant de l’utilisation de l’enregistreur ou du lo-giciel fourni.
• Assurez-vous qu’aucun câble ni qu’aucun autre objet Précautions d’utilisation ne se trouve près de l’ouverture de ventilation à l’arrière de l’appareil. Si l’ouverture est bloquée, cela risquerait d’entraîner une surchauffe interne Importantes informations concernant la susceptible de causer un incendie ou des dommages. •...
Page 103
Protection contre les chocs et les vibrations Remplacement du disque dur et d’autres En cas de chocs ou de vibrations, le lecteur de disque dur consommables risque d’être endommagé et une perte de données est Le disque dur, le ventilateur et la batterie de l’appareil susceptible de se produire.
4) Des amplificateurs ou haut-parleurs optionnels sont nécessaires. disques durs internes. Les valeurs sont basées sur des mesures de Sony. Ces valeurs ne sont pas garanties, car la performance peut varier en fonction de l’environnement de Important l’utilisateur.
Le matériel requis pour l’utilisation de cet enregistreur Vérifiez que les éléments suivants sont compris dans est le suivant. l’emballage : • Caméras de réseau Sony NSR-1200/1100 Contactez votre revendeur pour les détails sur les • Serveur d’enregistrement de surveillance NSR-1200/ caméras de réseau Sony compatibles.
Téléchargement de Utilisation du manuel en fichiers stockés sur le Le NSR stocke les modes d’emplois et autres documents (en japonais, anglais, français, allemand, italien, Les documents, comme les modes d’emploi et les outils, espagnol, chinois simplifié et russe). sont stockés sur l’unité NSR. Voici la marche à suivre Ces manuels sont en format PDF (Portable Document pour télécharger des fichiers stockés sur l’unité...
Caractéristiques et fonctions Avant (Quand le un abri est ouvert) NSR-1200/1100/1050H POWER NETWORK STATUS ERROR A Voyant LED d’alimentation H Connecteur USB S’allume en vert quand le démarrage est terminé. Utilisez ce connecteur pour raccorder un clavier, une S’allume en orange quand l’appareil est en mode de souris ou une mémoire flash USB à...
L Orifices de ventilation Les orifices permettent à l’air de circuler de l’avant vers l’arrière du NSR. Veillez à ne pas obstruer les orifices de ventilation, à ne pas laisser la poussière s’accumuler dans les grilles internes des orifices et à ne pas empêcher le mouvement de l’air.
Page 109
E Connecteur d’entrée de capteur N Connecteur d’alimentation Utilisez ce connecteur pour raccorder les lignes d’entrée Utilisez ce connecteur pour raccorder le cordon du capteur. d’alimentation. Pour les détails et schémas de connexion des entrées de O Connecteur d’entrée de câble de caméra capteur, voir «...
Etapes de préparation Etape 1 : Installation Avant la configuration, veillez à ce que l’emplacement d’installation soit assez spacieux et fort pour supporter Etape 1 : Installation (page 111) l’appareil. ↓ Le NSR-1200 pèse environ 13,5 kg (29,8 livres), le NSR-1100 pèse environ 12 kg (26,7 livres) et le NSR- Etape 2 : Connexions (page 115) 1050H pèse environ 11,5 kg (25,4 livres).
Quand le boîtier avant est ouvert Installation de montage du châssis 494 mm (19,4 pouces) Installez le NSR sur un châssis à l’aide du kit de 117 mm montage en châssis en option (vendu séparément). (4,6 pouces) 106 mm 377 mm (14,8 pouces) (4,2 pouces) Avertissement •...
Page 113
Remarque Attention Le rail intérieur sera installé sur le NSR, tandis que Des rails installés à différentes hauteurs pourrait l’assemblage de rails sera installé sur le châssis. provoquer des dysfonctionnements du NSR. Installez les rails sur le châssis. Préparation du NSR (1) Ajustez la longueur des rails pour qu’elle Utilisez les attaches et les vis fournies pour installer le corresponde à...
Manuel d’installation qui est attaché à désactiver le verrou, faites glisser le NSR aussi loin NSRE-S200. Pour plus de détails sur les extensions qu’il peut aller. NSBK-A16 optionnelles, contactez votre revendeur Onglet vert Sony. Etape 1 : Installation...
Utilisation recommandée de connecteur Etape 2 : Connexions pendant le fonctionnement de l’appareil Moniteur Connecteurs à utiliser Raccordez chaque dispositif à l’appareil. Connecteur Connecteur Connecteur Connecteur de moniteur de moniteur de moniteur de moniteur HDMI 1 HDMI 2 analogique analogique Connexion d’un moniteur Moniteur –...
NSR » (page 106). Vous pouvez aussi télécharger le programme d’installation de la dernière version de RealShot Manager Advanced à l’adresse suivante. http://www.sony.co.jp/net/Products/RSMAd/license_form.html Pour plus de détails sur l’installation et la connexion au NSR, consultez le guide d’installation de RealShot Manager Advanced (PDF).
l’archive du logiciel client de RealShot Manager Connexion d’une caméra Advanced. analogique • Si vous utilisez RealShot Manager Advanced comme contrôleur distant pour le NSR, sélectionnez [Client] Raccordez la caméra analogique à l’aide du câble pendant l’installation de RealShot Manager d’entrée de caméra analogique fourni.
Connexion du NSR-1200/1100/1050H au NSRE- Attention S200 Si vous utilisez des caméras et des unités d’alimentation qui superposent la tension CC sur le câble coaxial vidéo, faites bien attention aux connexions du câble coaxial. Si le câble de caméra sur lequel la tension CC est superposée est raccordé...
Raccordez le NSR au système UPS avec le câble de Etape 3 : Réglages série au connecteur de série à l’arrière du NSR. Cette section offre des informations sur la mise sous tension de l’appareil, et des explications générales sur l’enregistrement de caméras et d’autres dispositifs.
d’alimentation à l’arrière pour mettre l’appareil sous Cliquez sur [Next]. tension. • Si une mise hors tension forcée a été effectuée, l’appareil peut prendre plus longtemps à redémarrer. Mise hors tension de l’appareil Après l’ouverture de session NSR, cliquez sur haut de l’écran principal, et sélectionnez [Éteindre] dans le menu qui s’affiche.
Page 121
Sélectionnez un fuseau horaire, et cliquez sur [Suivant]. Réglez l’adresse IP pour le connecteur LAN 1, et cliquez sur [Suivant]. ↓ ↓ Réglez la date et l’heure, et cliquez sur [Suivant]. • Lorsque vous cochez la case [Enable NTP Server], Réglez l’adresse IP pour le connecteur LAN 2, et cliquez l’appareil fonctionne comme serveur NTP pour la sur [Suivant].
Page 122
Configurez les réglages de moniteur 1, et cliquez sur Configurez les partitions du disque dur interne, et [Suivant]. cliquez sur [Suivant]. • Si vous sélectionnez [Auto], le type de moniteur Définissez le nombre de partitions, et sélectionnez le raccordé et sa résolution sont détectés et configurés pourcentage de la capacité...
Sélectionnez le format vidéo des caméras analogiques à Accès au menu Configuration depuis connecter, et cliquez sur [Suivant]. l’écran d’ouverture de session (Cet écran ne s’affiche que si un NSR-1050H ou NSBK- Cliquez sur [Menu d’administration]. A16 (option) est connecté.) ↓...
Les caméras sont enregistrées. Configuration de base Cette section décrit comment enregistrer et configurer l’enregistrement d’alarme pour les dispositifs qui sont détectés automatiquement. Pour les détails sur l’enregistrement simultané de tous les dispositifs détectés automatiquement, consultez le guide des premiers pas (document séparé). Pour enregistrer une caméra Sélectionnez [Ouvrir fenêtre d’enreg.
Lorsque la configuration est terminée, l’écran principal Réglage Enregistrement Enregistrement s’affiche. programmé d’alarme Nettoyage Supprime les Pas de changement données qui par rapport à la dépassent la durée de configuration stockage. existante. 1) Si l’utilisateur n’a pas configuré les réglages de lieu de stockage pour la caméra, la capacité...
Réglages de panoramique, d’inclinaison et de Configurez les réglages suivants sur l’écranServer zoom pour les caméras analogiques Configuration du menu Administration. Configurez les réglages de panoramique, d’inclinaison et de zoom pour les caméras analogiques comme suit, depuis l’onglet [Control] de Device Configuration. 1 Sélectionnez [Maître] sous [Mode de serveur 1 Sélectionnez la caméra analogique.
Pour les détails sur les opérations de l’écran principal, Etape 4 : Vérification consultez le guide d’opération de la fenêtre de surveillance (document séparé) ou le guide de d’opérations l’utilisateur (PDF). Après la configuration de base, vérifiez que les images Attention de caméras s’affichent sur l’écran principal et vérifiez Lorsque vous raccordez un dispositif USB à...
Remarques Exemples de connexion • Ne raccordez pas les moniteurs aux connecteurs de moniteur HDMI 1 et 2. • Ne raccordez pas un moniteur au connecteur de Exemples de connexion de moniteur 1 à l’avant de l’appareil quand celui-ci est moniteur sous tension.
• Ne raccordez pas un moniteur au connecteur de moniteur 1 à l’avant de l’appareil quand celui-ci est sous tension. Exemple de connexion du NSRE- S200 Vous pouvez raccorder jusqu’à sept unités NSRE-S200 optionnelles au NSR-1200/1100/1050H dans les configurations suivantes. Remarque Le câble mini-SAS utilisé...
Autres aspects Voyant LED STATUS Si une erreur se produit avec l’appareil, le voyant LED ERROR du panneau avant clignote ou s’allume en fonction de l’état de cette erreur, et le voyant LED STATUS s’allume. STATUS ERROR Le voyant LED STATUS (état) indique les situations d’erreur suivantes. Codes d’erreur affichés pendant le démarrage Codes d’erreur affichés pendant l’opération (Le voyant LED ERROR clignote quand une erreur se...
RS-422/485 Port d’E/S Contact No. RS-422 RS-485 Distribution de contacts du port d’E/S Entrée de capteur Contact No. ENTREE CAPTEUR 3.3 v Utilisation du réceptacle d’E/S IN_8 – Insérez un petit tournevis plat dans la fente supérieure ou IN_8 + inférieure de l’emplacement où...
Pour plus de détails, consultez le guide de l’utilisateur Avant de contacter votre revendeur ou un centre de (PDF). service Sony, veuillez vérifier les éléments suivants. Si le problème persiste, veuillez les contacter. Le moniteur raccordé au connecteur HDMI n’affiche pas correctement.
(« CLUF ») constitue un contrat légal établi entre vous • Vérifiez que le DVD/CD est bien introduit dans le et Sony Corporation (« SONY »). Par ce CLUF, vous lecteur. êtes autorisé à utiliser le Logiciel SONY sur un serveur •...
Page 134
SONY A ÉTÉ AVISÉ DE L’ÉVENTUALITÉ DE TELS DOMMAGES. Article 3. AJOUT DE FONCTION Dans le cas où SONY vous octroierait le droit de Article 6. RÉSILIATION DE CONTRAT supprimer une restriction d’exécution présente dans le SONY peut résilier le présent CLUF si vous ne Logiciel ou d’ajouter une fonction au Logiciel, par un...
« Téléchargement de fichiers stockés allowed. sur le NSR » (page 106). N’envoyez pas à Sony vos questions sur le contenu du code source. Preamble The licenses for most software are designed to take away Licence MPEG-4 Video Patent your freedom to share and change it.
Also, for each author’s protection and ours, we want to You may charge a fee for the physical act of transferring make certain that everyone understands that there is no a copy, and you may at your option offer warranty warranty for this free software.
Page 137
medium does not bring the other work under the scope License will not have their licenses terminated so of this License. long as such parties remain in full compliance. You may copy and distribute the Program (or a You are not required to accept this License, since work based on it, under Section 2) in object code or you have not signed it.
Page 138
decide if he or she is willing to distribute software NO WARRANTY through any other system and a licensee cannot impose 11. BECAUSE THE PROGRAM IS LICENSED that choice. FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE This section is intended to make thoroughly clear what EXTENT PERMITTED BY APPLICABLE LAW.
something other than `show w' and `show c'; they could END OF TERMS AND even be mouse-clicks or menu items--whatever suits your program. CONDITIONS You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer”...
with the library after making changes to the library and GNU LESSER GENERAL recompiling it. And you must show them these terms so they know their rights. PUBLIC LICENSE We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, Version 2.1, February 1999 which gives you legal permission to copy, distribute and/ or modify the library.
the library. A more frequent case is that a free library complete source code means all the source code for all does the same job as widely used non-free libraries. In modules it contains, plus any associated interface this case, there is little to gain by limiting the free library definition files, plus the scripts used to control to free software only, so we use the Lesser General compilation and installation of the library.
Page 142
table used by this function must be optional: if the If distribution of object code is made by offering access application does not supply it, the square root function to copy from a designated place, then offering equivalent must still compute square roots.) access to copy the source code from the same place satisfies the requirement to distribute the source code, These requirements apply to the modified work as a...
Page 143
and its use are covered by this License. You must supply It may happen that this requirement contradicts the a copy of this License. If the work during execution license restrictions of other proprietary libraries that do displays copyright notices, you must include the not normally accompany the operating system.
Page 144
11. If, as a consequence of a court judgment or Each version is given a distinguishing version number. If allegation of patent infringement or for any other the Library specifies a version number of this License reason (not limited to patent issues), conditions are which applies to it and “any later version”, you have the imposed on you (whether by court order, agreement option of following the terms and conditions either of...
Yoyodyne, Inc., hereby disclaims all copyright interest END OF TERMS AND in the library `Frob’ (a library for tweaking knobs) written by James Random Hacker. CONDITIONS <signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice How to Apply These Terms to Your That’s all there is to it! New Libraries If you develop a new library, and you want it to be of the...
optionnelle, mini-SAS ×4 (SFF- Caractéristiques 8088), 3,0 Gbit/s) (1) Entrée de capteur (compatible avec les dispositifs 3,3 V à 24 V CC, entrée de photocoupleur, isolée NSR-1200/1100/1050H de l’unité principale) (8) Sortie d’alarme (maximum 24 V Processeur CC, 1 A, sortie automate à NSR-1200 : Quad Core Xeon contacts électriques, isolée de NSR-1100 : Dual Core Xeon...
Page 147
à enregistrer un contenu de tout type. • Vérifiez toujours que l’appareil fonctionne correctement avant l’utilisation. Sony n’assumera pas de responsabilité pour les dommages de quelque sorte qu’ils soient, incluant mais ne se limitant pas à la compensation ou au remboursement, à...
Page 148
• Die im Lieferumfang enthaltene Software ist nicht für die Verwendung mit Setup-Assistenten ......... 167 anderen Recordern geeignet. Anmelden ............171 • Es ist nicht möglich, andere als die von Sony mitgelieferte, speziell für Konfigurieren der Grundeinstellungen ... 171 den Gebrauch mit diesem Gerät vorgesehene Software im Gerät zu in- stallieren.
• Wenn das Gerät in einem Gestell installiert ist, müssen Sicherheitsmaßnahmen Sie ebenfalls darauf achten, dass die Ventilatoröffnung an der Rückseite sowie die Lüftungsöffnungen an der Vorderseite nicht durch Kabel oder andere Wichtige Sicherheitsinformationen Gegenstände blockiert werden. Installieren Sie das Gerät nicht in einer Umgebung, in der die oben •...
Page 150
Sicherheitshinweise für Produkte mit Sicherheitshinweise hinsichtlich Temperatur und Luftfeuchtigkeit eingebauter Festplatte Verwenden und lagern Sie das Gerät nur an Orten, an Dieses Gerät ist mit einer eingebauten Festplatte denen die angegebenen Temperatur- und ausgestattet. Die Festplatte ist ein Präzisionsgerät. Wenn Luftfeuchtigkeitswerte nicht über- oder unterschritten sie Stößen, Vibrationen, statischer Elektrizität, hohen werden.
30 fps. Diese Bildfrequenz kann unter Umständen durch Fragmentierung der internen Festplatten geringer ausfallen. Werte basieren auf Messungen von Sony. Diese Werte werden nicht garantiert, da die Leistung von den jeweiligen Umgebungsbedingungen abhängt. 2) Bei QuadVGA-Auflösung (1.280 × 960) beträgt die Bildfrequenz 1/4 des bei VGA-Auflösung erreichten...
Hilfe von Metadaten durchzuführen, ist eine Kamera erforderlich, die eine Bewegungserkennung mit Metadaten • Sony-Netzwerkkameras unterstützt. Die Verwendung von Metadaten wird für bis zu Informationen über kompatible Sony- 32 Kameras unterstützt. Netzwerkkameras erhalten Sie bei Ihrem Händler. 4) Optionale Audioverstärker oder Lautsprecher werden •...
Paketinhalt Herunterladen von auf dem NSR gespeicherten Prüfen Sie, ob die nachfolgend aufgeführten Gegenstände in der Packung enthalten sind: Dateien NSR-1200/1100 Auf dem NSR-Gerät sind Dokumente (z. B. • Surveillance Recording Server NSR-1200/1100 (1) Benutzerhandbücher) und Softwarewerkzeuge • Schlüssel für Frontblende (2) gespeichert .
Verwenden des PDF- Handbuchs Auf dem NSR sind Benutzerhandbücher und andere Dokumente gespeichert (in japanischer, englischer, französischer, deutscher, italienischer, spanischer, chinesischer Sprache und Russisch). Die Kopien dieser Handbücher sind im PDF-Format erstellt. Vorbereitung Um die auf dem NSR gespeicherten Benutzerhandbücher verwenden zu können, muss die folgende Software auf dem Computer installiert sein.
Eigenschaften und Funktionen Vorderseite (Bei geöffneter Decke) NSR-1200/1100/1050H POWER NETWORK STATUS ERROR A Power-LED H USB-Anschluss Leuchtet grün, wenn das Hochfahren abgeschlossen ist. Schließen Sie hier eine USB-Tastatur, Maus oder einen Leuchtet gelb, wenn das Gerät im Bereitschaftszustand USB-Flash-Speicher an das NSR an. ist.
Rückseite NSR-1200/1100 NSR-1050H A Lüfter E Sensor-Eingangsanschluss Die Lüfteröffnungen dürfen nicht abgedeckt werden, da Schließen Sie hier die Sensor-Eingangssignalleitungen dies zur Entstehung eines Wärmestaus im Gerät und in der Folge zu Entzündungen oder Beschädigungen Einzelheiten zum Anschluss und führen kann. Verkabelungsdiagramme für die Sensoreingänge finden Sie im Abschnitt ‚,E/A-Anschluss“...
H Audioeingang Referenzdaten für die Schließen Sie hier ein Audiosignal eines Peripherie- Audiogeräts, z. B. eines Mikrofons, an. Installation Plug-In Power-Mikrofone werden unterstützt. I Mini-SAS-Ausgangsanschluss Schließen Sie hier das Mini-SAS-Kabel für die Stromverbrauch und Verbindung zu einem NSRE-S200 an. Das NSRE-S200 ist ein optionales Einschaltstrom Erweiterungsspeichergerät.
Bei geöffneter Frontblende Schritt 1: Installation 494 mm (19,4 Zoll.) 117 mm Stellen Sie vor der Installation des Gerätes sicher, dass (4,6 Zoll.) der Aufstellungsort genügend Platz bietet und stabil 106 mm 377 mm (14,8 Zoll.) (4,2 Zoll.) genug ist, um das das Gerät zu tragen. Das NSR-1200 wiegt ca.
Wiederholen Sie diesen Vorgang mit der anderen Installation im Rack Schienenbaugruppe. Bei Einbau des Geräts der NSR in ein Rack ist das wahlweise erhältliche Rack-Montagekit (wird separat Hinweis verkauft) zu verwenden. Die innere Schiene wird am NSR montiert, die Schienenbaugruppe jedoch im Rack. Warnung •...
Page 161
Vorbereiten des Racks Montieren des NSR im Rack Installieren Sie die Schienen im Rack. Setzen Sie den NSR in das Rack ein, und sichern Sie ihn. Legen Sie die Montageposition der Schienen im Vorsicht Rack vorher fest. Ziehen Sie zur Vermeidung von Verletzungsgefahren die Wir empfehlen, die Position mit einem Hilfe einer weiteren Person heran, wenn Sie das Gerät Filzschreiber zu kennzeichnen.
Monitoranschluss 1 Monitoranschluss 2 Rundkopfschr aube Installieren der optionales Zubehör Über der Installation von NSRE-S200, beziehen Sie sich bitte auf das Handbuch, das an NSRE-S200 befestigt wird. Weitere Informationen zu optionalen NSBK-A16- Erweiterungen erhalten Sie bei Ihrem Sony-Händler. Schritt 2: Anschlüsse...
Während des Betriebs empfohlene Anschließen von Tastatur, Maus Anschlussverteilung und Fernbedienung. Monitor Zu verwendende Anschlüsse Schließen Sie die Geräte an die USB-Anschlüsse an der HDMI- HDMI- Analoger Analoger Monitoran Monitoran RGB- RGB- Vorderseite und Rückseite des Geräts an. schluss 1 schluss 2 Monitoran Monitoran...
Achtung Ausführliche Informationen über die Installation und • Lesen Sie vor dem Installieren des Gerätes den das Herstellen der Verbindung zum NSR finden Sie im Abschnitt ‚,Wichtige Installationsinformationen“ RealShot Manager Advanced Installationshandbuch (Seite 149). Wenn das Gerät in Kombination mit (PDF-Datei).
Anschließen einer analogen Achtung Kamera Bei der Verwendung von Kameras und Stromversorgungseinheiten, die über das Video- Schließen Sie die analoge Kamera mit dem im Koaxialkabel Gleichspannung übertragen, ist die Lieferumfang enthaltenen Kabel für analoge Verkabelung mit Vorsicht vorzunehmen. Wenn das Kameraeingangssignale an.
Verbinden des NSR-1200/1100/1050H mit dem Schließen Sie das NSR mit dem im Lieferumfang NSRE-S200 enthaltenen Netzkabel an die USV an. Schließen Sie das NSR mit dem hierzu vorgesehenen seriellen Kabel über den seriellen Anschluss auf der Rückseite des NSR an die USV an. Mini-SAS- Mini-SAS-Kabel Ausgangsanschluss...
Netzschalters auf der Vorderseite oder der Rückseite Schritt 3: Einstellungen des Geräts ein. • Wenn eine Abschaltung erzwungen wurde, kann der Start des Geräts unter Umständen länger dauern. Dieser Abschnitt enthält Informationen zum Einschalten des Geräts und allgemeine Erklärungen zum Abschalten des Geräts Registrieren von Kameras und anderen Geräten.
Page 168
Klicken Sie auf [Next]. Wählen Sie eine Zeitzone aus, und klicken Sie auf [Weiter]. ↓ ↓ Lesen Sie die Lizenzvereinbarung sorgfältig durch, klicken Sie auf [Accept] und dann auf [Next]. Stellen Sie Datum und Uhrzeit ein, und klicken Sie auf [Weiter].
Page 169
Stellen Sie die IP-Adresse für LAN-Anschluss 1 ein, Nehmen Sie die Einstellungen für Monitor 1 vor, und und klicken Sie auf [Weiter]. klicken Sie auf [Weiter]. • Wenn Sie die Option [Auto] auswählen, werden der Typ des angeschlossenen Monitors und seine Auflösung erkannt und automatisch konfiguriert.
Page 170
Konfigurieren Sie die Partitionen für die interne Wählen Sie das Videoformat für die anzuschließenden Festplatte, und klicken Sie auf [Weiter]. analogen Kameras aus, und klicken Sie auf [Weiter]. Geben Sie die Anzahl der Partitionen an, und wählen (Dieser Bildschirm wird nur angezeigt, wenn ein NSR- Sie, welcher Prozentsatz der Gesamtkapazität den 1050H oder NSBK-A16 (optional) angeschlossen ist.) einzelnen Partitionen zugeordnet werden soll.
Zugreifen auf das Einrichtungsmenü vom Konfigurieren der Anmeldebildschirm aus Grundeinstellungen Klicken Sie auf Dieser Abschnitt beschreibt, wie die [Verwaltungsmenü]. Alarmaufzeichnung für automatisch erkannte Geräte registriert und konfiguriert wird. Eine Anleitung zum Registrieren sämtlicher automatisch erkannten Geräte in einem Arbeitsgang finden Sie im Installationshandbuch (separates Dokument).
Page 172
Die Kameras werden registriert. Wenn die Konfiguration abgeschlossen ist, wird der Bildschirm [Haupt] angezeigt. ↓ Nach dem Konfigurieren der Grundeinstellungen gelten Konfigurieren der Alarmaufzeichnung für die einzelnen Optionen die folgenden Werte: Wählen Sie [Automatische Konfiguration von Einstellung Geplante Alarmgesteuerte Alarmaufzeichnungen], und klicken Sie auf [Weiter]. Aufzeichnung Aufzeichnung Bildformat...
Gerätekonfiguration entsprechend der folgenden Einstellung Geplante Alarmgesteuerte Anleitung. Aufzeichnung Aufzeichnung Bereinigung Daten, deren Gegenüber der Aufbewahrungsfrist vorhandenen überschritten ist, Konfiguration nicht werden gelöscht. geändert. 1) Wenn der Benutzer keine Speicherort-Einstellungen für die Kamera konfiguriert hat, werden die weiteren Einstellungen auf der Grundlage der Kapazität der ersten Partition der internen Festplatte des Geräts berechnet.
Konfigurieren Sie im Bildschirm Schritt 4: Überprüfen der Serverkonfiguration des Verwaltungsmenüs folgende Einstellungen. Funktion Wenn die grundlegenden Konfigurationen abgeschlossen sind, stellen Sie sicher, dass im Bildschirm „HAUPT“ Kamerabilder angezeigt werden und die dazugehörigen Bedienfunktionen funktionieren. 1 Wählen Sie unter [Zentralservermodus] die Option [Master].
das Systemprotokoll angezeigt wird, können Sie Überprüfen Sie, ob die Bilder der in Schritt 2 hier die gegebenenfalls aufgetretenen Probleme ausgewählten Kamera im Monitorfenster angezeigt einsehen. werden. Informationen über die Bedienung des Bildschirms „HAUPT“ finden Sie im Überwachungsfenster- Benutzerhandbuch (separates Dokument) oder im Benutzerhandbuch (PDF-Datei).
• Schließen Sie keinen Monitor an den Anschlussbeispiele Monitoranschluss 1 auf der Vorderseite des Geräts an, solange das Gerät eingeschaltet ist. Beispiel 3) Betrieb mit einem HDMI-Monitor und Beispiele für den Anschluss von einem analogen RGB-Monitor (HDMI-Monitor wird zur Bedienung verwendet) Monitoren Dieses Gerät unterstützt mehrere Kombinationen von Monitoranschlüssen.
NSRE-S200-Anschlussbeispiel Sie können bis zu sieben optionale NSRE-S200- Einheiten entsprechend folgendem Verzweigungsschema an das NSR-1200/1100/1050H anschließen. Hinweis Das für den Anschluss verwendete Mini-SAS-Kabel ist im Lieferumfang des NSRE-S200 enthalten. Schließen Sie die NSRE-S200-Erweiterungen in der folgenden Reihenfolge an. NSR-1200/1100/1050H POWER NETWORK STATUS ERROR...
Verschiedenes STATUSANZEIGE Wenn im Gerät ein Fehler auftritt, blinkt oder leuchtet je nach dem Fehlerstatus die Fehler-LED am vorderen Bedienfeld des Geräts, und die Status-LED leuchtet. STATUS ERROR Die Statusanzeige signalisiert die nachfolgend aufgeführten Fehlersituationen. Fehlercodes während des Hochfahrens Fehlercodes während des Betriebs (Die Fehleranzeige blinkt, wenn während des (Die Fehleranzeige leuchtet, wenn während des Startvorgangs ein Fehler auftritt.)
RS-422/485 E/A-Anschluss Pin-Nr. RS-422 RS-485 Stiftzuweisung des E/A-Anschlusses Sensoreingang Pin-Nr. SENSOREINGANG 3.3 v Verwenden der E/A-Buchsen IN_8 – Stecken Sie einen kleinen Schraubenzieher in den IN_8 + oberen oder unteren Schlitz neben der Öffnung, in die IN_7 – Sie ein Kabel stecken möchten (AWG Nr. 28 bis 18). IN_7 + Stecken Sie das Kabel ein, und lassen Sie dann den IN_6 –...
Ihren Händler oder ein Sony-Kundendienstcenter erreicht, wird das Bild angezeigt. Konfigurieren Sie wenden. Wenn sich das Problem hierdurch nicht dann die Monitorauflösung neu. Näheres finden Sie beheben lässt, wenden Sie sich an ein SONY- im Benutzerhandbuch (PDF-Datei). Servicecenter. Der an den HDMI-Anschluss Das NSR funktioniert nicht.
Page 181
angezeigt. Versuchen Sie in diesen Fällen die folgende • Stellen Sie sicher, dass die DVD/CD ordnungsgemäß Lösung: in das Laufwerk eingelegt ist. Schalten Sie den Eingang auf den Monitor um. • Überprüfen Sie, ob die DVD/CD sauber und nicht Starten Sie den Monitor neu. zerkratzt ist.
Artikel 3. HINZUFÜGEN VON FUNKTIONEN ENDBENUTZER- Falls Ihnen von Sony das Recht gewährt wird, eine in der LIZENZVEREINBARUNG Software implementierte funktionale Einschränkung zu entfernen oder eine Funktion zur Software (Achtung) Der folgende Text ist eine Übersetzung der hinzuzufügen, gelten durch Ihre Zahlung an Sony offiziellen englischen Version der ‚,Endbenutzer-...
(ii) DEKODIERUNG VON MPEG-4 VIDEO, DAS VON EINEM ANWENDER ALS Artikel 6. BEENDIGUNG PERSÖNLICHEN UND SONY ist berechtigt, diese EULA zu kündigen, NICHTKOMMERZIELLE HANDLUNG sofern Sie gegen darin enthaltene Bestimmungen CODIERT WURDE UND/ODER VON EINEM verstoßen, unbeschadet der Rechte Sonys auf...
Also, for each author’s protection and ours, we want to GNU GENERAL PUBLIC make certain that everyone understands that there is no warranty for this free software. If the software is LICENSE modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not Version 2, June 1991...
Page 185
You may charge a fee for the physical act of transferring medium does not bring the other work under the scope a copy, and you may at your option offer warranty of this License. protection in exchange for a fee. You may copy and distribute the Program (or a You may modify your copy or copies of the work based on it, under Section 2) in object code or...
Page 186
License will not have their licenses terminated so decide if he or she is willing to distribute software long as such parties remain in full compliance. through any other system and a licensee cannot impose that choice. You are not required to accept this License, since you have not signed it.
NO WARRANTY END OF TERMS AND 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO CONDITIONS WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/ How to Apply These Terms to Your OR OTHER PARTIES PROVIDE THE New Programs...
something other than `show w' and `show c'; they could GNU LESSER GENERAL even be mouse-clicks or menu items--whatever suits your program. PUBLIC LICENSE You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright Version 2.1, February 1999 disclaimer”...
with the library after making changes to the library and the library. A more frequent case is that a free library recompiling it. And you must show them these terms so does the same job as widely used non-free libraries. In they know their rights.
Page 190
complete source code means all the source code for all table used by this function must be optional: if the modules it contains, plus any associated interface application does not supply it, the square root function definition files, plus the scripts used to control must still compute square roots.) compilation and installation of the library.
Page 191
If distribution of object code is made by offering access and its use are covered by this License. You must supply to copy from a designated place, then offering equivalent a copy of this License. If the work during execution access to copy the source code from the same place displays copyright notices, you must include the satisfies the requirement to distribute the source code,...
Page 192
It may happen that this requirement contradicts the 11. If, as a consequence of a court judgment or license restrictions of other proprietary libraries that do allegation of patent infringement or for any other not normally accompany the operating system. Such a reason (not limited to patent issues), conditions are contradiction means you cannot use both them and the imposed on you (whether by court order, agreement...
which applies to it and “any later version”, you have the END OF TERMS AND option of following the terms and conditions either of that version or of any later version published by the Free CONDITIONS Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.
Yoyodyne, Inc., hereby disclaims all copyright interest Technische Daten in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. <signature of Ty Coon>, 1 April 1990 NSR-1200/1100/1050H Ty Coon, President of Vice Prozessor That’s all there is to it! NSR-1200: Quad Core Xeon NSR-1100: Dual Core Xeon NSR-1050H: Dual Core Xeon...
Page 195
Haupteinheit, (8) INHALTEN JEDER ART ÜBERNEHMEN. Serielle Schnittstelle für USV: RS- • Bestätigen Sie vor dem Gebrauch immer, dass das Gerät richtig arbeitet. SONY KANN KEINE HAFTUNG FÜR 232C (1) SCHÄDEN JEDER ART, EINSCHLIESSLICH ABER Steuerung der analogen Kameras...
Page 196
Collegamento a una rete ......... 212 legge sul diritto d’autore. • Sony non assume alcuna responsabilità per danni, mancato profitto o re- Collegamento della telecamera analogica ..213 clami da terze parti derivanti dall’utilizzo del registratore o del soft-ware in Collegamento di un’unità...
cavi o altri oggetti. Non installare l’apparecchio in Precauzioni per l’uso ambienti non conformi ai requisiti di cui sopra. Utilizzare l’apparecchio in posizione orizzontale Informazioni importanti sulla sicurezza • L’apparecchio è stato progettato per essere utilizzato • Accertarsi di collegare l’unità a una fonte di esclusivamente in posizione orizzontale.
Page 198
o simili, utilizzare un mezzo che non trasmetta Precauzioni per l’utilizzo dei dispositivi USB vibrazioni eccessive. Diversamente, l’HDD potrebbe • Questa unità supporta le periferiche di archiviazione risultare danneggiato. di massa USB 2.0 standard. A seconda del tipo di • Non spostare l’apparecchio mentre è acceso. Anche dispositivo di memorizzazione di massa USB 2.0, prima di installarlo su rack o rimuoverlo, è...
L’uso di metadati è supportato per un massimo di 32 ridursi a causa della frammentazione dei dischi rigidi telecamere. interni. I valori sono basati su misure effettuate da Sony. 4) Sono necessari amplificatori audio o altoparlanti opzionali. Tali valori non sono garantiti, perché le prestazioni possono variare a seconda delle condizioni di funzionamento dell’utente.
L’utilizzo di questo registratore richiede il seguente l’unità, consultare la Guida per l’utente (PDF). hardware. • Telecamere di rete Sony Contattare il proprio rivenditore per informazioni sulle telecamere di rete Sony compatibili. • Monitor • Tastiera USB • Mouse USB • Telecomando USB •...
Contenuto della Download dei file confezione memorizzati sull’NSR Verificare che i seguenti articoli siano inclusi nella I documenti, ad esempio i manuali di istruzioni, e gli presente confezione: strumenti sono memorizzati sull’unità NSR. Procedere come descritto di seguito per effettuare il download dei NSR-1200/1100 file memorizzati sull’unità...
Utilizzo del manuale PDF Sull’unità NSR sono memorizzati i manuali operativi e altri documenti (versioni localizzate in giapponese, inglese, francese, tedesco, italiano, spagnolo cinese semplificato e russo). Le copie di questi manuali vengono create in pdf (Portable Document Format). Preparazione Per poter utilizzare i manuali d’uso memorizzati sull’unità...
Funzioni e caratteristiche Lato anteriore (Quando la una coperta è aperta) NSR-1200/1100/1050H POWER NETWORK STATUS ERROR A LED di alimentazione H Connettore USB Al termine del riavvio emette una luce verde. Utilizzare questo connettore per collegare all’unità NSR Emette una luce gialla quando è in standby. un mouse e tastiera USB o una memoria flash USB.
Lato posteriore NSR-1200/1100 NSR-1050H A Ventilatore E Connettore ingresso sensore Assicurarsi di non ostruire la griglia del ventilatore. In Utilizzare questo connettore per collegare le linee di caso di ostruzione della griglia del ventilatore, il ingresso del sensore. conseguente surriscaldamento dell’unità può causare Per i dettagli di collegamento e gli schemi di danni o incendi.
H Connettore ingresso audio Dati di riferimento per Questo connettore consente l’ingresso di un segnale audio proveniente da una periferica audio, ad es. un l’installazione microfono. I microfoni con alimentazione a spina sono supportati. I Connettore di uscita mini-SAS Consumo di corrente e corrente di Utilizzare questo connettore per il cavo mini-SAS utilizzato per collegare un’unità...
Guida alla durata di registrazione Fasi preliminari Server Memoria di Numero di Codec Numero Velocità Frequenza espansione telecamere (dimensioni) di giorni in bit di frame NSR- 0 unità MPEG4 512 kbps 10,00 fps 1050H (VGA) Passo 1: Installazione (pag 207) NSR- 0 unità...
Quando la lunetta frontale è aperta Passo 1: Installazione 494 mm (19,4 poll.) 117 mm Prima della configurazione, verificare che il luogo di (4,6 poll.) installazione offra spazio e robustezza sufficienti per 106 mm 377 mm (14,8 poll.) (4,2 poll.) supportare l’unità.
Installazione con montaggio a rack Nota Installare l’unità NSR in un rack utilizzando il kit di La guida interna verrà installata sulla NSR, mentre montaggio su rack opzionale (venduto a parte). il gruppo guida verrà installato sul rack. Preparazione dell’unità NSR Attenzione •...
Page 209
Si consiglia di segnare questa posizione con un Tirare le guide scorrevoli dai gruppi guida. evidenziatore o con un pennarello. Avvertenza Se le guide vengono installate ad altezze differenti, possono verificarsi malfunzionamenti nella NSR. Installare le guide sul rack. (1) Regolare la lunghezza delle guide in modo che corrispondano alla lunghezza del rack.
Connettore monitor 1 Connettore monitor 2 Vite a testa circolare Installazione dei accessori opzionali Per ulteriori informazioni sull’installazione di NSRE- S200, consultare il Manuale di installazione NSRE- S200. Per ulteriori informazioni sull’espansione NSBK- A16, rivolgersi al rivenditore Sony. Passo 2: Collegamenti...
Connettore raccomandato quando Collegamento della tastiera, del l’apparecchio è in uso mouse e del telecomando Monitor Connettori da utilizzare Collegare i dispositivi ai connettori USB sulla parte Connettor Connettor Connettor Connettor e monitor e monitor e monitor e monitor anteriore e posteriore dell’unità. HDMI 1 HDMI 2 analogico...
RealShot Manager Advanced, consultare “Download dei file memorizzati sull’NSR” (pagina 201). È possibile anche effettuare il download del programma di installazione dell’ultima versione di RealShot Manager Advanced dall’URL seguente. http://www.sony.co.jp/net/Products/RSMAd/license_form.html Per ulteriori informazioni sull’installazione e sul Passo 2: Collegamenti...
sovrapposta la tensione CC è collegato all’unità NSR, Collegamento della telecamera possono verificarsi malfunzionamenti. analogica Telecamera analogica Collegare la telecamera analogica utilizzando il cavo di ingresso della telecamera analogica in dotazione. Unità di VIDEO alimentazione Per controllare le operazioni Pan, Tilt e Zoom, collegare POWER NETWORK STATUS...
Collegamento dell’NSR-1200/1100/1050H Collegare l’unità NSR all’UPS con il cavo seriale all’unità NSRE-S200 dedicato al connettore seriale posto sul retro dell’NSR. Connettore di Cavo mini-SAS uscita mini-SAS Cavo seriale Cavo di Verso la fonte di alimentazione alimentazione Connettore di Collegamento di un dispositivo di uscita ingresso mini-SAS audio Collegamento di due unità...
anteriore oppure l’interruttore di alimentazione sul Passo 3: Impostazioni pannello posteriore per accendere l’unità. • Se in precedenza è stato effettuato uno spegnimento forzato, l’unità potrebbe impiegare più tempo per Questa sezione fornisce informazioni su come l’avvio. accendere l’unità e indicazioni generali su come registrare le telecamere ed altri dispositivi.
Page 216
Fare clic su [Next]. Selezionare un fuso orario, quindi fare clic su [Avanti]. ↓ ↓ Leggere attentamente il Contratto di licenza con l’utente Impostare la data e l’ora, quindi fare clic su [OK]. finale, fare clic su [Accept], quindi fare clic su [Next]. •...
Page 217
Impostare l’indirizzo IP per il connettore LAN 1, quindi Configurare le impostazioni per il monitor 1, quindi fare fare clic su [Avanti]. clic su [Avanti]. • Se si seleziona [Auto], il tipo di monitor collegato e la relativa risoluzione vengono rilevati e configurati automaticamente.
Page 218
Configurare le partizioni dell’unità disco rigido interna, Selezionare il formato video delle telecamere quindi fare clic su [Avanti]. analogiche da collegare, quindi fare clic su [Avanti]. Specificare il numero di partizioni e selezionare la (Questa schermata viene visualizzata solo quando è percentuale della capacità...
Per accedere al Menu Setup dalla Esecuzione della configurazione schermata di accesso base Fare clic su [Menu amministrazione]. Questa sezione descrive come registrare e configurare la registrazione di allarmi per dispositivi che vengono rilevati automaticamente. Per dettagli su registrare contemporaneamente tutti i dispositivi rilevati automaticamente, consultare la Guida introduttiva (documento separato).
Page 220
Ora le telecamere vengono registrate. Una volta completata la configurazione, si apre la schermata principale. ↓ Dopo l’esecuzione della configurazione base, i valori Per configurare la registrazione di allarmi per ciascuna impostazione saranno come descritto di Selezionare [Registrazione allarme automatica], quindi seguito.
Impostazioni delle delle funzioni Pan, Tilt e Impostazione Registrazione Registrazione Zoom per le telecamere analogiche pianificata allarmi Configurare le impostazioni di Pan, Tilt e Zoom per Pulitura Elimina i dati che Invariata rispetto alla telecamere analogiche come descritto di seguito dalla sono superiori alla configurazione scheda [Controllo] di Configurazione dispositivo.
Configurare le seguenti impostazioni nella Passo 4: Verifica del schermata Configurazione server del Menu amministrazione. funzionamento Una volta terminate le configurazioni di base, accertarsi che le immagini della telecamera vengano visualizzate nella schermata principale e verificare altre operazioni del genere. 1 Selezionare [Master] in [Modalità...
Per ulteriori informazioni sulle funzioni della schermata Esempi di collegamento principale, fare riferimento alla Guida alle funzioni della finestra Monitoraggio (documento separato) o alla Guida per l’utente (PDF). Esempi di collegamento del Attenzione monitor Quando si collega una periferica USB all’unità, potrebbe accendersi la spia [ERROR] in basso a destra Questa unità...
Esempio di collegamento NSRE- Note S200 • Non collegare i monitor ai connettori monitor HDMI 1 e 2. È possibile collegare fino a sette unità NSRE-S200 • Non collegare un monitor al connettore monitor 1 opzionali all’NSR-1200/1100/1050H nelle seguenti sulla parte anteriore dell’unità mentre l’unità è accesa. configurazioni ad albero.
Varie LED di stato Quando si verifica un errore nell’unità, il LED DI ERRORE sul pannello anteriore dell’unità lampeggia o si illumina a seconda dello stato di errore e il LED DI STATO si illumina. STATUS ERROR Il LED di stato indica le seguenti situazioni di errore. Codici di errore visualizzati durante la Codici di errore visualizzati durante il sequenza di avvio...
RS-422/485 Porta di I/O N. pin RS-422 RS-485 Assegnazione dei pin della porta di I/O Sensor In N. pin SENSOR IN 3.3 v Utilizzo di una presa I/O IN_8 – Inserire un piccolo cacciavite ad intaglio nella fessura IN_8 + superiore o inferiore del foro a cui si desidera collegare IN_7 –...
DI MENO per ridurre la risoluzione dell’uscita video. Prima di contattare il proprio rivenditore o un centro di Quando la risoluzione dell’uscita video raggiunge un assistenza Sony, leggere quanto riportato di seguito. Se valore compatibile con il monitor, viene visualizzata il problema persiste, contattarli.
Page 228
Il monitor collegato al connettore HDMI Il sistema non riesce a leggere i dati sul non viene visualizzato correttamente. disco DVD o CD. • Se si commuta l’ingresso per il monitor HDMI o si • Assicurarsi che sia utilizzato un disco di tipo ricollega il cavo, in alcuni casi è...
L’UTENTE FINALE Articolo 4. DIRITTO (Attenzione) Di seguito è riportata una traduzione della SONY è proprietario e detentore di tutti i diritti e del versione ufficiale in lingua inglese del “Contratto di copyright sul Software oppure possessore di licenza o licenza con l’utente finale”.
È possibile scaricare il codice sorgente dall’apparecchio. Per ulteriori informazioni sul download del codice sorgente, consultare “Download dei file memorizzati sull’NSR” (pagina 201). Non indirizzare a Sony richieste di informazioni e delucidazioni riguardanti il contenuto del codice sorgente. Licenza MPEG-4 Video Patent...
Also, for each author’s protection and ours, we want to GNU GENERAL PUBLIC make certain that everyone understands that there is no warranty for this free software. If the software is LICENSE modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not Version 2, June 1991...
Page 232
You may charge a fee for the physical act of transferring medium does not bring the other work under the scope a copy, and you may at your option offer warranty of this License. protection in exchange for a fee. You may copy and distribute the Program (or a You may modify your copy or copies of the work based on it, under Section 2) in object code or...
Page 233
License will not have their licenses terminated so decide if he or she is willing to distribute software long as such parties remain in full compliance. through any other system and a licensee cannot impose that choice. You are not required to accept this License, since you have not signed it.
NO WARRANTY END OF TERMS AND 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO CONDITIONS WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/ How to Apply These Terms to Your OR OTHER PARTIES PROVIDE THE New Programs...
something other than `show w' and `show c'; they could GNU LESSER GENERAL even be mouse-clicks or menu items--whatever suits your program. PUBLIC LICENSE You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright Version 2.1, February 1999 disclaimer”...
with the library after making changes to the library and the library. A more frequent case is that a free library recompiling it. And you must show them these terms so does the same job as widely used non-free libraries. In they know their rights.
Page 237
complete source code means all the source code for all table used by this function must be optional: if the modules it contains, plus any associated interface application does not supply it, the square root function definition files, plus the scripts used to control must still compute square roots.) compilation and installation of the library.
Page 238
If distribution of object code is made by offering access and its use are covered by this License. You must supply to copy from a designated place, then offering equivalent a copy of this License. If the work during execution access to copy the source code from the same place displays copyright notices, you must include the satisfies the requirement to distribute the source code,...
Page 239
It may happen that this requirement contradicts the 11. If, as a consequence of a court judgment or license restrictions of other proprietary libraries that do allegation of patent infringement or for any other not normally accompany the operating system. Such a reason (not limited to patent issues), conditions are contradiction means you cannot use both them and the imposed on you (whether by court order, agreement...
Each version is given a distinguishing version number. If END OF TERMS AND the Library specifies a version number of this License which applies to it and “any later version”, you have the CONDITIONS option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation.
Yoyodyne, Inc., hereby disclaims all copyright interest Caratteristiche tecniche in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. <signature of Ty Coon>, 1 April 1990 NSR-1200/1100/1050H Ty Coon, President of Vice Processore That’s all there is to it! NSR-1200: Quad Core Xeon NSR-1100: Dual Core Xeon NSR-1050H: Dual Core Xeon...
Page 242
• Eseguire sempre una registrazione di prova, e verificare che ingresso fotoaccoppiatore, il contenuto sia stato registrato correttamente. isolato da unità principale) (8) LA SONY NON SARÀ RESPONSABILE DI DANNI DI Uscita allarme (max. 24 V CC, 1 A, QUALSIASI TIPO, COMPRESI, MA SENZA uscita relè meccanico, isolato da LIMITAZIONE A, RISARCIMENTI O RIMBORSI A unità...
Page 243
Conexión de la NSRE-S200 ......260 • Sony no asume ninguna responsabilidad por los daños, pérdidas de be- Conexión de otros dispositivos ....... 261 neficios o reclamaciones de terceras partes que puedan resultar de la uti- lización de la grabadora o del software suministrado.
• Asegúrese de que no hay cables ni otros objetos cerca Precauciones de uso de la abertura de ventilación en la parte posterior de la unidad. Si la abertura se bloquea, puede producirse un calentamiento interno y provocar un incendio o daños Información importante de seguridad en el equipo.
Page 245
Protección frente a golpes y vibraciones periódicamente. Si utiliza la unidad a temperatura Si somete la unidad a golpes o vibraciones, el disco duro ambiente, el ciclo de sustitución normal será de dos a podría resultar dañado y ocasionar la pérdida de datos. tres años.
Los valores están basados en mediciones mediante metadatos. Hasta 32 modelos de cámara admiten efectuadas por Sony. Estos valores no están garantizados, la utilización de metadatos. debido a que es posible que el rendimiento cambie según al entorno operativo del usuario.
Guía del usuario (PDF). • Cámaras de red Sony Póngase en contacto con su distribuidor para obtener más información acerca de cámaras de red Sony compatibles. • Monitor • Teclado USB • Ratón USB •...
Contenido del paquete Descarga de archivos almacenados en la NSR Compruebe que los siguientes elementos se incluyen en el paquete: Los documentos como los manuales de instrucciones y NSR-1200/1100 las herramientas se almacenan en la unidad NSR. Lleve • Servidor de grabación de vigilancia NSR-1200/1100 a cabo lo siguiente para descargar archivos que se encuentren almacenados en la unidad NSR.
Utilización del manual La NSR almacena manuales de instrucciones y otros documentos (versiones en japonés, inglés, francés, alemán, italiano, español, chino simplificado y ruso). Las copias de estos manuales están disponibles en formato pdf (Portable Document Format). Preparativos Es necesario disponer del siguiente software instalado en el ordenador para poder utilizar los manuales de instrucciones almacenados en la NSR.
Características y funciones Parte frontal (Con el una tapa abierto) NSR-1200/1100/1050H POWER NETWORK STATUS ERROR A LED de alimentación Utilice este conector para conectar un monitor. Se ilumina en verde una vez iniciada la unidad. El conector 1 para monitor (y el conector 1 para monitor Se ilumina en color ámbar cuando se encuentra en modo de la parte posterior de la unidad) y el conector 1 para de espera.
Parte posterior NSR-1200/1100 NSR-1050H A Ventilador E Conector de entrada del sensor Tenga cuidado de no obstruir la rejilla del ventilador. Si Utilice este conector para conectar las líneas de entrada la rejilla se encuentra obstruida, es posible que aumente del sensor.
H Conector de entrada de audio Datos de referencia para Utilice este conector para recibir sonido de dispositivos de audio periféricos, como micrófonos. la instalación La unidad es compatible con micrófonos de alimentación por enchufe. I Conector de salida mini-SAS Consumo de corriente y corriente Utilice este conector para conectar el cable mini-SAS utilizado para conectar la NSRE-S200.
Guía de duración de la grabación Pasos de preparación Servidor Almacenamiento Número Códec Número Velocidad Velocidad de extensión (tamaño) de días de bits cámaras fotogramas NSR- 0 unidades MPEG4 512 kbps 10,00 fps Paso 1: Instalación (página 254) 1050H (VGA) ↓...
Con el bisel de la parte frontal abierto Paso 1: Instalación 494 mm (19,4 plg.) Antes de iniciar la configuración, compruebe que la 117 mm (4,6 plg.) ubicación donde se desea realizar la instalación dispone 106 mm (4,2 plg.) 377 mm (14,8 plg.) de espacio y robustez suficientes para albergar la unidad.
Repita el procedimiento con el otro soporte de riel Instalación en bastidor para extraer el correspondiente riel interior. Instale la NSR en una estantería con el kit de montaje de estanterías opcional (se vende por separado). Nota El riel interior se instalará en la NSR, mientras que Advertencia soporte de riel se instalará...
Page 256
Preparación de la estantería Montaje de la NSR en la estantería Instale los rieles en la estantería. Inserte la NSR en la estantería y, a continuación, fíjela firmemente. Decida donde desea instalar los rieles en la estantería. Precaución Se recomienda marcar este punto con un rotulador. Con el fin de evitar daños personales, se necesitan al menos dos personas para manipular la unidad.
Para obtener más información acerca de la instalación de NSRE-S200, consulte el Manual de instalación que se ata a NSRE-S200. Para obtener más información acerca de las extensiones NSBK-A16 opcionales, póngase en contacto con el distribuidor Sony. Paso 2: Conexiones...
Recomendaciones de uso de los conectores Conexión del teclado, el ratón y la durante el funcionamiento de la unidad unidad de control remoto Monitor Conectores a utilizar Conecte los dispositivos a los conectores USB en las Conector Conector Conector Conector 1 para 2 para 1 para...
También es posible descargar el instalador correspondiente a la versión más reciente de RealShot Manager Advanced de la siguiente URL. http://www.sony.co.jp/net/Products/RSMAd/license_form.html Para obtener más información acerca de la instalación y conexión a la NSR, consulte la Guía de instalación de RealShot Manager Advanced (PDF).
voltaje de cc se encuentra conectado a la NSR, es posible Conexión de una cámara analógica que se produzcan fallos de funcionamiento. Conecte la cámara analógica mediante el cable de entrada analógico de la cámara suministrado. Cámaras analógicas Para controlar las operaciones de rotación, inclinación y Unidad de suministro de VIDEO...
Conexión de la NSR-1200/1100/1050H a la Conecte la NSR a la fuente de alimentación NSRE-S200 ininterrumpida mediante el cable de alimentación suministrado. Conecte la NSR al suministro de alimentación ininterrumpido mediante el cable de serie exclusivo al conector en serie situado en la parte posterior de la Conector de NSR.
• Si se ha apagado la unidad de manera forzada Paso 3: Ajustes anteriormente, es posible que esta tarde más tiempo en encenderse. En esta sección se facilita información acerca de cómo Para apagar la unidad encender la unidad y explicaciones generales acerca de cómo registrar cámaras y otros dispositivos.
Page 263
Haga clic en [Next]. Seleccione la zona horaria y haga clic en [Siguiente]. ↓ ↓ Lea el acuerdo de licencia detenidamente, haga clic en Ajuste la fecha y la hora, y haga clic en [Siguiente]. [Accept] y, a continuación, haga clic en [Next]. •...
Page 264
Configure la dirección IP para el conector LAN 1 y haga Configure los ajustes del monitor 1 y haga clic en clic en [Siguiente]. [Siguiente]. • Si se selecciona [Auto], el tipo de monitor conectado y su resolución se detectan y configuran automáticamente.
Page 265
Configure las particiones para la unidad de disco duro Seleccione el formato de vídeo de las cámaras interno y haga clic en [Siguiente]. analógicas que desee conectar y haga clic en [Siguiente]. Especifique el número de particiones y seleccione el (Esta pantalla aparece únicamente si se ha conectado porcentaje de la capacidad total que desea asignar a cada NSR-1050H o NSBK-A16 (opcional))
Para acceder al menú de configuración Realización de la configuración desde la pantalla de inicio de sesión básica Haga clic en [Administration Menu]. En esta sección se describe cómo registrar y configurar la grabación por alarma en dispositivos detectados automáticamente. Para obtener más información acerca de cómo registrar todos los dispositivos detectados automáticamente a la vez, consulte la Guía de inicio (documento independiente).
Page 267
Las cámaras se registran. Cuando haya finalizado la configuración, aparecerá la pantalla principal. ↓ Después de llevar a cabo la configuración básica, los Para configurar la grabación por alarma valores correspondientes a cada ajuste serán los siguientes. Seleccione [Automatic Alarm Record] y haga clic en Ajuste Grabación Grabación por...
Ajustes de rotación, inclinación y zoom para Ajuste Grabación Grabación por cámaras analógicas programada alarma Configure los ajustes de rotación, inclinación y zoom Limpiar Elimina los datos que No modificado para cámaras analógicas del modo siguiente desde la superan la duración respecto a la ficha [Control] de la configuración del dispositivo.
Configure los siguientes ajustes en la pantalla de Paso 4: Verificación del configuración del servidor del menú de administración. funcionamiento Una vez finalizadas las configuraciones básicas, asegúrese de que las imágenes de la cámara se visualizan en la pantalla principal y compruebe el resto de operaciones. 1 Seleccione [Maestro] en [Modo de servidor central].
Para obtener más información acerca de las operaciones Ejemplos de conexión de la pantalla principal, consulte la Guía de funcionamiento de la ventana de supervisión (documento independiente) o la Guía del usuario (PDF). Ejemplos de conexión de Precaución monitores Si se conecta un dispositivo USB a la unidad, es posible que se ilumine el indicador [ERROR] en la parte inferior Esta unidad admite varias combinaciones de conexiones derecha de la pantalla principal.
• No conecte un monitor al conector 1 para monitor de Notas la parte frontal de la unidad mientras esta se encuentra • No conecte los monitores a los conectores 1 y 2 para encendida. monitor HDMI. • No conecte un monitor al conector 1 para monitor de Ejemplo de conexión de la unidad la parte frontal de la unidad mientras esta se encuentra encendida.
Varios INDICADORES DE ESTADO Si se produce un error en la unidad, el LED de error situado en el panel frontal de la unidad parpadeará o se iluminará en función del estado del error, y el LED de estado se iluminará. STATUS ERROR El indicador STATUS indica las siguientes situaciones de error.
RS-422/485 Puerto de E/S Número de clavija RS-422 RS-485 Asignación de clavijas del puerto de Entrada/Salida Entrada de sensor Número de clavija SENSOR IN Utilización del receptáculo E/S 3.3 v Inserte un destornillador de ranura pequeño en la ranura IN_8 – superior o inferior del orificio al que desea conectar el IN_8 + cable (AWG del Nº...
Antes de ponerse en contacto con su distribuidor o con la resolución del monitor se demasiado baja en un centro de asistencia técnica de Sony, compruebe los comparación con la salida del monitor. Pulse siguientes elementos. Si el problema persiste, póngase CTRL+ALT+SIGNO MENOS tantas veces como sea en contacto con estos.
Page 275
El monitor conectado al conector HDMI El sistema no puede leer la información no se visualiza correctamente. de discos DVD/CD. • Si se cambia la entrada del monitor HDMI o se vuelve • Asegúrese de que está utilizando un tipo de disco a conectar el cable, es posible que las imágenes no se correcto.
NOTIFICADO DE LA POSIBILIDAD DE QUE SE PRODUJERAN TALES DAÑOS. Artículo 3. ADICIÓN DE FUNCIONES En caso de que SONY le haya otorgado el derecho de Artículo 6. CANCELACIÓN eliminar una restricción funcional implementada en el SONY puede rescindir este CLUF si usted no software o añadir una función al software, mediante...
“Descarga de archivos almacenados en la NSR” (página 248). No se dirija a Sony para realizar consultas en relación con el contenido del código fuente. Licencia MPEG-4 Video Patent Portfolio ESTE PRODUCTO ESTÁ...
Also, for each author’s protection and ours, we want to GNU GENERAL PUBLIC make certain that everyone understands that there is no warranty for this free software. If the software is LICENSE modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not Version 2, June 1991...
Page 279
You may charge a fee for the physical act of transferring medium does not bring the other work under the scope a copy, and you may at your option offer warranty of this License. protection in exchange for a fee. You may copy and distribute the Program (or a You may modify your copy or copies of the work based on it, under Section 2) in object code or...
Page 280
License will not have their licenses terminated so decide if he or she is willing to distribute software long as such parties remain in full compliance. through any other system and a licensee cannot impose that choice. You are not required to accept this License, since you have not signed it.
NO WARRANTY END OF TERMS AND 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO CONDITIONS WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/ How to Apply These Terms to Your OR OTHER PARTIES PROVIDE THE New Programs...
something other than `show w' and `show c'; they could GNU LESSER GENERAL even be mouse-clicks or menu items--whatever suits your program. PUBLIC LICENSE You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright Version 2.1, February 1999 disclaimer”...
with the library after making changes to the library and the library. A more frequent case is that a free library recompiling it. And you must show them these terms so does the same job as widely used non-free libraries. In they know their rights.
Page 284
complete source code means all the source code for all table used by this function must be optional: if the modules it contains, plus any associated interface application does not supply it, the square root function definition files, plus the scripts used to control must still compute square roots.) compilation and installation of the library.
Page 285
If distribution of object code is made by offering access and its use are covered by this License. You must supply to copy from a designated place, then offering equivalent a copy of this License. If the work during execution access to copy the source code from the same place displays copyright notices, you must include the satisfies the requirement to distribute the source code,...
Page 286
It may happen that this requirement contradicts the 11. If, as a consequence of a court judgment or license restrictions of other proprietary libraries that do allegation of patent infringement or for any other not normally accompany the operating system. Such a reason (not limited to patent issues), conditions are contradiction means you cannot use both them and the imposed on you (whether by court order, agreement...
which applies to it and “any later version”, you have the END OF TERMS AND option of following the terms and conditions either of that version or of any later version published by the Free CONDITIONS Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.
Yoyodyne, Inc., hereby disclaims all copyright interest Especificaciones in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. <signature of Ty Coon>, 1 April 1990 NSR-1200/1100/1050H Ty Coon, President of Vice Procesador That’s all there is to it! NSR-1200: Quad Core Xeon NSR-1100: Dual Core Xeon NSR-1050H: Dual Core Xeon...
Page 289
SONY NO SE HACE RESPONSIBLE POR DAÑOS DE NINGÚN TIPO, INCLUYENDO PERO NO LIMITADO A LA COMPENSACIÓN O PAGO POR FALLO EN HACER Salida de alarma (máximo de 24 V CUALQUIER TIPO DE CONTENIDO DE GRABACIÓN...
Page 290
NSR-1200/1100/1050H ......332 安装参考数据 ..........298 电流消耗和浪涌电流 ........298 商标 记录数据的存储容量 ........298 • “IPELA”和 是 Sony Corporation 的商标。 记录持续时间指南 ........299 • Microsoft、 Windows 和 Internet Explorer 是 Microsoft Corporation 在美国和 / 摄像头数目 ..........299 或其他国家 / 地区的商标或注册商标。 • HDMI、 和 High-Definition Multimedia Interface 是 HDMI 准备步骤...
特性和功能 正面 (前面板开启时) NSR-1200/1100/1050H POWER NETWORK STATUS ERROR A 电源 LED H USB 接口 设备开启后呈绿色。 本接口用于将 USB 键盘、鼠标或 USB 闪存连接到 待机状态时发出黄光。 NSR。 B 网络 LED (1 至 3) I 监视器接口 1 NSR 背面 LAN 接口上进行作业时,相应指示灯发 该接口用于连接监视器。 出绿光。 监视器接口 1 (监视器接口 1 位于设备背面)和设 备背面的...
Page 297
背面 NSR-1200/1100 NSR-1050H A 风扇 E 传感器输入接口 本接口用于连接传感器输入线。 注意不要阻塞风扇格栅。如果阻塞格栅,则热量会 在设备内部逐渐积聚,导致伤害和 / 或火灾。 有关传感器输入连接的详细信息和布线图,请参阅 “I/O 端口” (第 318 页) 。 B 电源开关 F 报警器输出接口 要打开设备,请按下位置 1 上的开关。 本接口用于连接报警器输出线。 C RS-232C 接口 有关报警器连接的详细信息和布线图,请参阅 “I/ 本接口用于控制模拟摄像头。 . O 端口” (第 318 页) 。 本接口不可与...
H 音频输入接口 安装参考数据 本接口用于从外部音频设备 (例如麦克风)输入音 频。 支持插入式功率麦克风。 电流消耗和浪涌电流 I 微型 SAS 输出接口 本接口用于连接微型 SAS 电缆,该电缆用于连接 NSRE-S200。 NSRE-S200 是可选的扩展存储设备。 型号 交流输入电压 满负荷 涌入电流 100 V 2.66 A J USB 接口 NSR-1200 本接口用于将 USB 键盘、鼠标或 USB 闪存连接到 220 V 1.14 A NSR。 100 V 1.84 A NSR-1100...
Page 316
注意 NSRE-S200 随附了用于连接的微型 SAS 电缆。 按以下顺序连接 NSRE-S200 扩展。 NSR-1200/1100/1050H POWER NETWORK STATUS ERROR NSRE-S200 POWER NETWORK STATUS ERROR NSRE-S200 POWER NETWORK STATUS ERROR POWER NETWORK STATUS ERROR POWER NETWORK STATUS ERROR POWER NETWORK STATUS ERROR POWER NETWORK STATUS ERROR POWER NETWORK STATUS ERROR...
其他信息 状态 LED 如果设备发生错误,设备前面板上的错误 LED 会根据错误状态而闪烁或亮起,而且状态 LED 也会亮起。 STATUS ERROR STATUS LED 指示以下错误状况。 启动阶段显示的错误代码 操作阶段显示的错误代码 (启动阶段出现错误时,错误 LED 闪烁。 ) (操作阶段出现错误时,错误 LED 亮起。 ) 状态 LED 错误 LED 可能的原因 状态 LED 错误 错误 错误 可能的原因 代码 代码 闪烁 电源故障 打开 温度过高 1 2 3 4 1 2 3 4 闪烁...
可以从本设备下载源代码。有关下载源代码的详细 allowed. 信息,请参阅“下载 NSR 上保存的文件” (第 294 页) 。 有关源代码内容的问题,请勿咨询 Sony 公司。 Preamble The licenses for most software are designed to take away MPEG-4 Video Patent Portfolio 许可 your freedom to share and change it. By contrast, the 证...
Also, for each author’s protection and ours, we want to You may charge a fee for the physical act of transferring make certain that everyone understands that there is no a copy, and you may at your option offer warranty warranty for this free software.
Page 323
medium does not bring the other work under the scope License will not have their licenses terminated so of this License. long as such parties remain in full compliance. You may copy and distribute the Program (or a You are not required to accept this License, since work based on it, under Section 2) in object code or you have not signed it.
Page 324
decide if he or she is willing to distribute software NO WARRANTY through any other system and a licensee cannot impose 11. BECAUSE THE PROGRAM IS LICENSED that choice. FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE This section is intended to make thoroughly clear what EXTENT PERMITTED BY APPLICABLE LAW.
something other than `show w' and `show c'; they could END OF TERMS AND even be mouse-clicks or menu items--whatever suits your program. CONDITIONS You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer”...
with the library after making changes to the library and GNU LESSER GENERAL recompiling it. And you must show them these terms so they know their rights. PUBLIC LICENSE We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, Version 2.1, February 1999 which gives you legal permission to copy, distribute and/ or modify the library.
the library. A more frequent case is that a free library complete source code means all the source code for all does the same job as widely used non-free libraries. In modules it contains, plus any associated interface this case, there is little to gain by limiting the free library definition files, plus the scripts used to control to free software only, so we use the Lesser General compilation and installation of the library.
Page 328
table used by this function must be optional: if the If distribution of object code is made by offering access application does not supply it, the square root function to copy from a designated place, then offering equivalent must still compute square roots.) access to copy the source code from the same place satisfies the requirement to distribute the source code, These requirements apply to the modified work as a...
Page 329
and its use are covered by this License. You must supply It may happen that this requirement contradicts the a copy of this License. If the work during execution license restrictions of other proprietary libraries that do displays copyright notices, you must include the not normally accompany the operating system.
Page 330
11. If, as a consequence of a court judgment or option of following the terms and conditions either of allegation of patent infringement or for any other that version or of any later version published by the Free reason (not limited to patent issues), conditions are Software Foundation.
Yoyodyne, Inc., hereby disclaims all copyright interest END OF TERMS AND in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. CONDITIONS <signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice How to Apply These Terms to Your That’s all there is to it! New Libraries If you develop a new library, and you want it to be of the...