Table of Contents
Advertisement
Performing a Manual Action
You can perform an action from the Manual Action toolbar
in the main window.
1
Display the Manual Action pane in the main window.
Click
in the pane at the top right of the screen, and
select [Manual Action] from the menu that appears.
2
Select the action you want to perform, and click
[Perform].
A confirmation message appears.
3
Click [OK].
The action is performed.
Setting Items of Manual Action Screen
You can configure manual action settings.
The items that are displayed differ depending on the device
for performing the action.
After configuring each item, click [Apply] to save your
settings.
Name
Enter the name of the action. It can be up to 32 characters
long.
Show on the Main Window
Select the check box to show this layout in the [Action]
pane of the main window.
Register as OFF Action
Select the check box to register an action as an off action.
Off actions operate as shown below.
Tour:
Stops the tour
Alarm Output:
Turns off alarm output
Beep:
Stops the beep
[Camera Action] Tab
Number of Settings
This displays the number of cameras target for the
action.
[Add Device] Button
This displays a dialog box for adding a camera as a
target for the action.
Camera Drop-down Menu
Select a camera.
93
Configuring Action Settings
Advertisement
Table of Contents
