Table of Contents
Advertisement
xPerforming Zooming In and Out Operations
When using a mouse with a scroll wheel, you can zoom in
and out by rotating the wheel.
• Rotate the wheel forward to zoom in.
• Rotate the wheel backward to zoom out.
Using Camera Presets
You can move the camera to preset positions stored on the
camera.
Note
You can also configure a new preset. For the configuration
procedure, refer to “Configuring Preset Positions”
(page 44).
1
Select any monitor frame, and display the images of
the camera you want to control.
2
Select a preset in [Preset] on the Camera Control pane.
The camera moves to the preset position.
Performing Camera Tours
You can perform “tours,” in which the camera moves
successively to preset pan, tilt, and zoom positions. The
camera only stops at each preset position for the duration
set in advance.
Note
To use the camera tour function, a camera tour needs to be
configured in advance. For the configuration procedure,
refer to “Configuring Camera Tours” (page 45).
1
Select any monitor frame, and display the images of
the camera you want to control.
2
Select a camera tour in [Tour] on the Camera Control
pane, and click
(Start Camera Tour).
The camera tour is performed.
Page 115
Advertisement
Table of Contents
