Monitoring Using Layout Tours; Monitoring Audio From Cameras - Sony NSR Series User'smanual

Note
When the Camera pane is not displayed, click
select [Camera] from the menu that appears to switch to
the Camera pane.
Changing the Layout
Select a layout on the [Layout] toolbar at the top of the
main screen to change the layout.

Monitoring Using Layout Tours

You can perform monitoring using the layout tour function
for sequentially switching the display shown on the display
at a preset time.
Note
To use the layout tour function, a layout tour needs to be
configured in advance. For the configuration procedure,
refer to "Configuring Layout Tours" (page 58).
1
Select a layout tour on the [Tour] toolbar at the top of
the main screen.
2
Click (Layout Tour Start).
The sequence operation starts.
If you click
106
Monitoring
again, the layout tour ends.

Monitoring Audio from Cameras

and
If you are using a camera with support for audio input, you
can monitor the audio input from the camera.
Select the monitor frame for which you want to monitor
the audio to output audio from the camera assigned to the
selected monitor frame.
If multiple monitor frames are selected, audio is only
output from the camera of the one selected last.
Adjusting the Volume
1
Click
The Volume Control dialog box appears.
2
Adjust the volume with the slider, and click [OK].
When you want to disable the sound, select the [Mute]
check box.
Note
In the disable state, audio is no longer output no matter
which monitor frame you select.
(Adjust Volume).
Slider