Table of Contents
Advertisement
Enable user to Get Tools from Remote
Select the check box to enable remote client downloading
of tools, operating manuals, and other documents using
FTP.
This is enabled under default settings.
User Name
This displays the user name. The user name is
"ftptool."
It cannot be changed.
Password
Enter the password. The default password is "ftptool."
Note
The user name and default password are both
"ftptool."
Setting Items of Server Name Screen
Enter the server name of NSR, and click [OK].
Setting Items of SNMP Menu Screen
Select [Agent] when configuring an SNMP community,
and [Traps] when configuring an SNMP trap, and click
[OK].
18
Changing Initial Settings with the Setup Menu
xSetting Items of SNMP Agent Screen
Configure each item, and click [OK].
Enable
Select this to enable the SNMP agent function.
Disable
Select this to disable the SNMP agent function.
Community
Enter the SNMP community name.
Contact
Enter the contact.
Normally, enter the mail address of the system
administrator.
Location
Enter the installation location of NSR.
Note
The MIB-2 object of "System" or "SystemUptime"
indicated with the object ID ".1.3.6.1.2.1.1" or
".1.3.6.1.2.1.25.1.1" can be obtained.
xSetting Items of SNMP Traps Screen
Configure each item, and click [OK].
Enable
Select this to enable the SNMP traps function.
Disable
Select this to disable the SNMP traps function.
Host IP Address
Enter the IP address of the traps host.
Advertisement
Table of Contents
