Table of Contents
Advertisement
2
Select "Custom Layout A" or "Custom Layout B"
from the [Layout] tree, and click
Note
"Custom Layout A" and "Custom Layout B" are
preset layout groups. Use them according to your
objective.
The area on the left side changes to the display for
setting the layout.
3
Configure each item.
For details on each of the items, refer to "Setting Items
of Layout Configuration Screen" (page 52).
1
1 Enter the name of the layout, as necessary. It can be
up to 32 characters long.
2 Set the number and layout of monitor frames.
Click [Apply Template], set each item in the Insert
Template dialog box that appears, and click [OK].
For details on each of the items, refer to "Setting
Items of Insert Template Dialog Box" (page 56)
3 Import an image such as a map or floor plan for the
(Add).
4 Move the monitor frames to determine their
5 Set a hotspot monitor, as necessary.
5 3 2
4
6 Configure each tab of [Properties], as necessary.
4
6
After configuring each item, click [Apply].
The layout is created.
background, as necessary.
Click [Insert Background Image], set each item in
the Insert Background Image dialog box that
appears, and click [OK].
For details on each of the items, refer to "Setting
Items of Insert Background Image Dialog Box"
(page 56).
positions, as necessary.
Move the monitor frames by dragging them with
the mouse.
Click to select one monitor frame to specify as the
hotspot monitor, and click [Hotspot].
A hotspot monitor displays the same images as the
camera monitor frame currently selected on the
main screen. To make images from the camera
monitor frame easier to see, the hotspot monitor is
specified to be larger than a regular camera monitor
frame.
For details on the setting items of each tab, refer to
"Setting Items of Properties" (page 54).
Settings Related to Monitoring
51
Advertisement
Table of Contents
