Monitor Frame - Sony NSR Series User'smanual

Monitor Frame

A B
G
A Camera Name
This displays the name of the camera.
B State
This displays the recording type (MANUAL REC,
ALARM REC, or SCHEDULE) during recording.
During the playback of recorded images, the playback
operation state (PAUSE, etc.) or playback speed (+1x,
-0.2x, etc.) is displayed ("+" is used to indicate
playback speed in the forward direction, and "-" to
indicate playback in the reverse direction).
C Bandwidth
This displays the amount of bandwidth used for
transferring images over a network connection.
D Frame Rate
This displays the speed at which images are imported
from the camera.
E VMD (Recorder):
This displays the detection criteria for Video Motion
Detection (Recorder).
F Display Images per Second
This display the speed at which the camera images are
refreshed on the monitor.
G Time
This displays the current date and time during the
monitoring and recording of live images, and the date
and time at the time of recording when playing back
recorded images.
Notes
• In the monitor frame is set as the hotspot, the images of
C the corresponding camera are displayed in cases such as
the following.
• When the monitor frame is selected.
D
• When there was a sensor input.
• When a motion detection or VMF package alarm
occurred.
• When a sensor input, motion detection, or VMF package
E
alarm has occurred and the images of the corresponding
camera are displayed on the monitor frame, a red frame
is displayed.
F
Switching a Monitor Frame to 1×1 View
Double-click on a monitor frame to switch the layout of
that monitor frame to 1×1 view.
Double-click the monitor frame again to restore the
original layout.
Note
If you switch to another layout or the layout is switched by
an action or layout tour after switching to 1×1 view,
double-clicking will not restore the original layout.
113
Monitoring