Engine Speed: Throttle Rod Adjustment (Turbo); Valve Tappet Clearance; General Engine Inspection - MacDon 9250 Operator's Manual

MAINTENANCE/SERVICE
Diesel Engine
ENGINE SPEED (continued):
TURBO ENGINE
THROTTLE ROD ADJUSTMENT
Throttle lever in cab should move fuel pump lever
the full range between slow speed stop and full
RPM stop without contacting the console at either
end. To adjust, reposition cable anchor in slots (C).
C
THROTTLE ROD ADJUSTMENT - TURBO
NOTE: In addition to in-cab tachometer, hand held
tach can be attached at bevel gear box output
shaft. For access to end of shaft, remove cover (D)
on right side of tractor frame.
D
ACCESS TO GEARBOX SHAFT
FOR TACHOMETER

VALVE TAPPET CLEARANCE

Every 1000 hours of operation, have diesel engine
valve tappet clearance checked and adjusted by
your Windrower dealer.

GENERAL ENGINE INSPECTION

Every 2000 hours of operation, see your
Windrower dealer for required general service or
tune-up.
For diesel engine, have fuel injection pump and
nozzles inspected at this time.
Form # 46584 Issue 11/06 Web Rev_01
68