MacDon 9250 Operator's Manual page 88

Electrical System
LIGHTS AND BULBS (continued)
REPLACING RED TAIL LIGHT BULBS
1. Remove two screws (A). Remove plastic lens.
2. Replace bulb and reinstall plastic lens.
NOTE: Bulb trade #1157.
REPLACING AMBER LIGHT BULBS
1. Remove light (B) from rubber bezel.
2. Replace bulb and reinstall light.
NOTE: Bulb trade #1156.
IMPORTANT: For proper lighting pattern, be sure
lights are installed right side up.
Form # 46584
MAINTENANCE/SERVICE
86
RED LIGHTS
B
AMBER LIGHTS
Issue 11/06 Web Rev_01
A