MacDon 9250 Operator's Manual page 64

Greasing the Windrower Tractor:
50 Hours (continued)
CASTER PIVOTS: (A) - TWO FITTINGS
MODEL XX50/XX40 TRACTORS
HEADER DRIVE PULLEY (B) - ONE FITTING
HEADER CLUTCH PIVOT (C) - ONE FITTING
H
TRANSMISSION DRIVELINE U-JOINTS (D) -
TWO FITTINGS
NOTE: There is a hole at (H) where a screw-driver
can be worked against flywheel ring gear to turn
driveline for zerk access, or a Cummins barring tool
may be used as described on page 64.
Form # 46584
MAINTENANCE/SERVICE
A
B
C
D
CASTER PIVOTS: (J) – FOUR FITTINGS
MODEL XX52 TRACTORS
WALKING BEAM PIVOT (E) - ONE FITTING
TOP LIFT LINK REAR PIVOT (F) - TWO FITTINGS
FORKED CASTER SPINDLE BEARINGS (G) -
FOUR FITTINGS (16.5 & 11-16 TIRES ONLY)
62
J
E
F
G
Issue 11/06 Web Rev_01