Chapter 4 User Preferences & Miscellaneous Digital Scanner Options; Introduction - Motorola DS6708 Product Reference Manual

CHAPTER 4 USER PREFERENCES &

Introduction

You can program the digital scanner to perform various functions, or activate different features. This chapter
describes each user preference feature and provides programming bar codes for selecting these features.
The digital scanner ships with the settings shown in
Default Parameters
programming is not necessary.
To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in
non-volatile memory and are preserved even when the digital scanner is powered down.
NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces are not merging.
If not using a USB cable or Synapse cable, select a host type (see each host chapter for specific host
information) after the power-up beeps sound. This is only necessary upon the first power-up when connected
to a new host.
To return all features to default values, scan the
programming bar code menus, asterisks indicate (
MISCELLANEOUS DIGITAL
SCANNER OPTIONS
for all host device and miscellaneous defaults). If the default values suit requirements,
*
Indicates Default
Table 4-1 on page 4-2
Set Default Parameter on page
*
)default values.
*
High Volume
Feature/Option
(00h)
(also see Appendix A, Standard
4-4. Throughout the