Using A Bluetooth Headset; Resetting The Mc92N0-G; Windows Ce Devices; Performing A Warm Boot - Motorola MC92N0-G User Manual

2 - 24 MC92N0-G User Guide
Using a Headset (MC92N0-G Shown)
Figure 2-24

Using a Bluetooth Headset

Use a Bluetooth headset for audio communication when an audio enabled application is used. See
Using Bluetooth on Windows Devices
that the MC92N0-G's volume is set appropriately before putting the headset on. When a Bluetooth headset is
connected the speakerphone is muted.

Resetting the MC92N0-G

Windows CE Devices

There are two reset functions, warm boot and cold boot. A warm boot restarts the MC92N0-G by closing all running
programs.
A cold boot also restarts the MC92N0-G, but erases all stored records and entries in RAM. Data saved in flash
memory or a memory card is not lost. In addition it returns formats, preferences and other settings to the factory
default settings.
Perform a warm boot first. This restarts the MC92N0-G and saves all stored records and entries. If the MC92N0-G
still does not respond, perform a cold boot.

Performing a Warm Boot

Hold down the Power button for approximately five seconds. As soon as the MC92N0-G starts to perform a warm
boot release the Power button.

Performing a Cold Boot

A cold boot restarts the MC92N0-G and erases all user stored records and entries that are not saved in flash
memory (Application and Platform folders) or a memory card. Never perform a cold boot unless a warm boot does
not solve the problem.
CAUTION
NOTE Any data previously synchronized with a computer can be restored during the next ActiveSync operation.
for information on connecting a Bluetooth device to the MC92N0-G. Ensure
Do not hold down any key, other than the Power button during a reset. Performing a cold boot restores
formats, preferences and other settings to the default settings.
Chapter 5,