Adding Device Dtm - Pepperl+Fuchs WHA-GW Manual

WHA-GW-*
Commissioning
HART IP communication DTM parameters
Parameter Explanation
Tag
Bus
Address
UDP
Address
UDP Port
4.6.3

Adding Device DTM

Adding the Device DTM
1. In the project view, right-click on the entry of the communication DTM you have added in
the previous step.
2. To add the device DTM, choose Add device.
The Device for window opens (see on page 43).
Device for window with Gateway DTM
3. Select the entry WHA-GW.
Default
Gateway name in the WHA-GW
Project view of
PACTware. Any name
may be entered (not
relevant for
connection to
gateway)
Gateway polling 1
address; must match
the settings of the
Gateway.
IP address of the 192.168.1.1
Gateway; must match
the settings of the
Gateway.
Gateway port number 5094
(HART over UDP);
must match the
settings of the
Gateway.
Corresponding Gateway parameters
Parameter
–
Parameterization
> Wired Communication
> Protocols > HART
> Bus Address
Parameterization
> Wired Communication
> Interfaces > Ethernet
> IP Address
Parameterization
> Wired Communication
> Protocols > HART
> Port Number
Default
–
1
192.168.1.1
5094
43