Appendix A; Supported Commands; Universal Commands - Pepperl+Fuchs WHA-GW Manual

WHA-GW-*

Appendix A

10 Appendix A
10.1

Supported Commands

The following tables show the HART commands supported by the device.
Note!
The Gateway – unlike a HART multiplexer – only accepts commands directly addressed to
its HART slave address.
10.1.1

Universal Commands

Command
Identity Commands
0
11
21
Static Parameter Commands
13
18
12
17
20
22
16
19
Status Commands
38
48
Action
Read unique identifier
Read unique identifier using tag
Read unique identifier using long
tag
Read tag, descriptor, date
Write tag, descriptor, date
Read message
Write message
Read long tag
Write long tag
Read final assembly number
Write final assembly number
Reset configuration changed flag
Read additional status
Description
12 Bytes device identifier are given
in the response
12 Bytes device identifier are given
in the response, if the given tag
complies to the tag of the gateway
12 Bytes device identifier are given
in the response, if the given long
tag complies to the long tag of the
gateway
Read the 8 digit tag, the 16 digit
description and the date.
Write the 8 digit tag, the 16 digit
description and the date
Read the 32 digit message
Write the 32 digit message
Read the 32 digit long tag
Write the 32 digit long tag
Reset the "Configuration changed"
response code
93