WHA-GW-*
Commissioning
Note!
If one of the software components is already installed on your system, the installation may
be omitted.
Where to download the required software?
1. Visit www.pepperl-fuchs.com and scroll down to the bottom of the page until you see the
area Pepperl+Fuchs International site links.
2. Click on the Process Automation link.
The Process Automation main page is loaded.
3. In the Process Automation Products menu, click on the Software link.
The Software main page is loaded.
4. Now download the software components Microsoft
WirelessHART DTM and, if required, the HART CommDTM. You might need to scroll
down the page to find the required component.
5. Unzip the downloaded files and store the data to your local hard drive.
4.3
Installing the Required Software
Hardware requirements for PACTware
®
•
IBM
•
Processor Intel/AMD min. 500 Mhz,
•
min. 256 MB RAM,
•
min. 200MB free disk space,
•
Graphics resolution 1024 x 768.
Software requirements for PACTware
•
Windows 2000 Service Pack 4, Windows XP Service Pack 1/2/3 or Windows Vista,
•
Microsoft
•
unzip software.
Note!
You need to be logged on to Windows with administrator privileges during installation.
or compatible PC,
®
.NET Framework Release 1.1 Service Pack 1,
®
.NET Framework, PACTware
®
and the device DTM:
®
and the device DTM:
®
,
34