Common Practice Commands; Wireless Commands - Pepperl+Fuchs WHA-GW Manual

WHA-GW-*
Appendix A
10.1.2

Common Practice Commands

Command
Device Management Commands
41
42
89
90
512
513
Data Link Layer Commands
59
106
I/O System Commands
74
77
85
86
84
I/O System (HOST I/F) Commands
88
94
10.1.3

Wireless Commands

Command
Network information commands
768
773
774
775
Action
Perform device self test
Perform device reset
Set real-time clock
Read real-time clock
Read country code
Write country code
Write number of response
preambles
Flush delayed response buffers
Read I/O system capabilities
Send command to sub-device using
card/channel
Read I/O channel statistics using
card/channel
Read sub-device statistics using list
index
Read sub-device identity summary
using list index
Write I/O system retry count
Read I/O system host statistics
Action
Write join key
Write network ID
Read network ID
Write network tag
Description
Initiates the self test function in the
device
Immediately after the response the
microprocessor of the device will be
reset.
12 Bytes device identifier are given
in the response, if the given long
tag complies to the long tag of the
gateway.
The number of preambles insert in
response telegrams can vary from
2 to 20. Default setting is 4.
Flush all Gateway DR buffers.
Also returns number of detected
devices.
Request embeds full Hart
command.
Read channel communication
statistics.
Read device communication
statistics.
Allows to read the Instrument list (a
single item at a time).
Read host I/F communication
statistics.
Description
Write the network's unique join key.
Only possible in security mode (see
chapter 5.4.1).
Write the unique network ID.
Read the unique network ID.
Write the network tag. The network
tag identifies the device in the
WirelessHART network.
94