Updating The Dtm Catalog - Pepperl+Fuchs WHA-GW Manual

WHA-GW-*
Commissioning
Installing the required Software
1. Install the Microsoft
following the installation instructions given on the screen.
2. Install PACTware
installation instructions given on the screen.
3. Install the WirelessHART DTM collection by starting the corresponding setup.exe file
and following the installation instructions given on the screen.
4. Install the HART CommDTM by starting the corresponding setup.exe file and following
the installation instructions given on the screen.
You have installed the required software.
4.3.1

Updating the DTM catalog

After you have installed the FDT base application and the new DTMs onto the computer, it
may be necessary to update the DTM catalog. In PACTware, the DTM catalog is called the
"device catalog" and is usually updated automatically when PACTware starts up.
If PACTware does not automatically update the device catalog, proceed as follows.
Updating the device catalog
1. Start PACTware.
2. Select View > Device catalog or press the F3 key or click the Device catalog icon on
the toolbar.
The Device catalog window opens.
3. Click the Update device catalog button to update the device catalog (see on page 35).
Device catalog in PACTware
4. Click Yes to confirm the next prompt.
The program then searches for recently installed DTMs (see on page 35). The updated
device catalog appears once the search has finished.
Search for DTMs in PACTware
®
.NET Framework by starting the corresponding setup.exe file and
®
by starting the corresponding setup.exe file and following the
35