Specifying Original Thickness: Thickness - Konica Minolta bizhub pro C6501 User Manual

Basic Job Settings
9.1.6

Specifying Original Thickness: Thickness

Use this function with the ADF to copy thin or thick originals.
Key
Prerequisites
0 Load the original in the ADF.
0 Avoid using Thin mode for double-sided originals, otherwise the originals
may be damaged.
0 This function is compatible with all the other functions.
1
Position the original in the ADF.
2
Touch [Original Setting] on the Copy Screen.
The Original Setting Screen will be displayed.
3
Touch [Thin] or [Thick] to highlight it.
– For the original of normal thickness (13 to 28 lb Bond), select [Nor-
mal].
4
Touch [OK] to return to the Copy Screen.
– Touch [Default Set] to restore the initial setting, or touch [Cancel] to
resume the previous setting.
bizhub PRO C6501
Description
Select for the original weight 29 to 81 lb Bond.
Select for the original weight 10 to 12 lb Bond.
9
9-13