Konica Minolta bizhub pro C6501 User Manual page 315

Basic Job Settings
(3 ) Touch [Weight]. Touch the desired paper weight key to highlight
it. Use [Unit Change] to select the desired unit of the paper weight.
Touch [OK] to complete the setting.
The tray 5 of Paper feeder unit PF-602, the tray of Large capacity
unit LU-202, and bypass tray exclusively allow the selection of 257
- 300 g/m
(4) Touch [Both Sides].
Touch [Front] or [Back] to select the printed side, select the adjust-
ment item (vertical zoom, horizontal zoom, vertical shift, horizontal
shift, or registration loop), and then touch [+ <--> –] to specify the
value to be positive or negative. Use the screen keypad or arrow
keys [,] and [+] to enter the desired adjustment value.
Touch [OK] to complete the setting, or touch [Reset] to clear the
setting.
bizhub PRO C6501
2
.
9
9-47