Konica Minolta bizhub pro C6501 User Manual page 424

11
3
Touch [Non-Image Area Erase] on the Application Screen.
The incompatible function keys will be dimmed to show inactivity.
4
Touch [OK] on the Application Screen.
The Copy Screen will be restored, with highlighted [Non-Image Area]
key displayed under the [Application] key.
This key can also be used to display the Application Screen for making
setting change.
Auto Zoom and Auto Paper Select are released and ×1.0 magnification
is selected automatically.
Available copy modes are 1->1 and 1->2. Selecting [1->2] will select
[Separate Scan] automatically.
5
Enter the desired print quantity from the control panel keypad, then
press [Start].
The machine will start printing when ready for output.
!
Detail
Machine Administrator can set the machine to obtain the optimum copy
result of Non-Image Area Erase by adjusting the density level of the orig-
inal manually. See page 6-28 of POD Administrator's reference.
Non-Image Area Erase may perform incorrectly if the lighting in the work
place is directly over the original glass. In this case, consult your service
representative about an appropriate place for installation.
11-42
Application Functions
bizhub PRO C6501