Konica Minolta bizhub pro C6501 User Manual page 81

Preparation for Use
No. Name
1 Finisher door
2 Primary (Main) tray
3 Secondary (Sub) tray
4 Exit guides
5 Suspension button
6 Inlet lever
7 Secondary (Sub) tray convey-
ance lever (right)
8 Secondary (Sub) tray convey-
ance lever (left)
9 Stapler unit conveyance knob
10 Stapler unit conveyance lever
11 Stapler unit handle
12 Stapler unit knob
bizhub PRO C6501
Description
Opens to the internal finisher to allow clearing mishandled
paper and replenishing staples.
Holds sets output in Non-sort mode, Collate mode (off-
set), or Staple mode.
Holds sets output in Non-sort mode.
Neatly aligns punched/folded sets delivered to the tray
using offset function or functions supported by Folding
Unit FD-503.
Pressed to suspend the current output job in order to take
out printed sheets from the tray. To restart the output job,
press [Start] on the control panel.
Opens leftward to remove mishandled paper.
Opens upward to remove mishandled paper.
Opens leftward to remove mishandled paper.
Can be turned clockwise to feed mishandled paper to the
stapler unit.
Opens downward to remove mishandled paper.
Withdraws the unit to allow removal of mishandled paper.
Can be turned counterclockwise to ease removal of mis-
handled paper.
2
2-11