Konica Minolta bizhub pro C6501 User Manual page 326

9
4
Move the fixing pressure adjustment
knob.
– Slide the knob rightward to align
the arrow mark on the lever with
the one on the right side, if print-
ed image on large-sized paper
shows unevenness.
– Slide the knob leftward to align
the arrow mark on the lever with
the one on the left side, if small-
sized thick paper has difficulty in
feeding when duplex-printed.
5
Close the left side cover of the fixing unit, return the fixing conveyance
unit to its original position, then close the front door of the main body.
6
Operate the copying/printing job.
– The fixing pressure adjustment
knob should not be moved un-
less the copy/print result requires
the adjustment.
When copying/printing is com-
pleted with the knob moved, be
sure to return it to the original po-
sition where the arrow mark on
the knob meets that in the mid-
dle.
7 CAUTION
The internal fixing unit is very hot.
%
To avoid getting burned, DO NOT TOUCH.
9-58
Basic Job Settings
bizhub PRO C6501