Konica Minolta bizhub pro C6501 User Manual page 409

Application Functions
? What if an entered page number is larger than the total original page
count?
% The insertion images will be added at the end of the finished set.
? Should the page number be entered from the smaller number?
% Not necessary. Insertions occur in sequence even if original page
numbers are entered out of sequence.
? What if the same page number is entered twice or more?
% The images will be inserted at specified location by the entered
count.
5
If desired, select the Booklet Pagination function as follows.
– Touch [Booklet Pagination] on the Insert Image Screen, then select
the desired mode. For details, see page 11-22.
– Touch [OK] to complete the setting and return to the Insert Image
Screen.
6
Touch [OK] to complete the setting.
– To restore the previous setting, touch [Cancel].
– To release the Insert Image function with the current setting re-
mained, touch [Function Off].
7
Touch [OK] on the Application Screen.
The Copy Screen will be restored, with highlighted [Insert Image] key
displayed under the [Application] key.
Use this key to jump to the subsequent screen to make any setting
change.
The [Separate Scan] key on the Copy Screen also appears highlighted
to show that the Separate Scan mode is automatically selected.
bizhub PRO C6501
11
11-27