Non-Sort/ Collate/ Uncollate Output To The Primary (Main) Tray - Konica Minolta bizhub pro C6501 User Manual

Output Applications
12.8.1 Non-sort/ Collate/ Uncollate Output to the Primary (Main)
Tray
A machine with Finisher FS-520 installed is set to output non-sorted sets to
the primary (main) tray by default, regardless of whether or not to be
equipped with other optional devices.
Please select an output mode by following the procedures below.
!
Detail
You can change the initial output mode in the Utility setting. See page 5-
40 of POD Administrator's reference for details.
For detailed specifications, see page 3-3 and page 7-10.
1
Position the original.
2
Touch [Output Appli.] on the Copy Screen.
The Output Application Screen will be displayed.
Output tray positions are indicated as square marks on the front image
of the machine, and the tray mark currently selected appears
highlighted.
If the primary (main) tray is not selected, touch [Output Tray] to select it.
For details on selecting an output tray, see page 12-3.
3
Select the desired output mode.
– For Non-sort output, cancel both [Collate] and [Uncollate].
– For Collate output, touch [Collate] to highlight it.
– For Uncollate output, touch [Uncollate] to highlight it.
– Select output face (Face Down / Face Up), and output order (1 to N
/ N to 1) as needed.
bizhub PRO C6501
12
12-61