Konica Minolta bizhub pro C6501 User Manual page 538

12
– To adjust the lead edge of the cover, touch [Cover Lead Edge Adj.]
Touch the positive/negative selection key to select positive or
negative of the adjustment value, then use the screen keypad,
upper/lower arrow keys, or the control panel keypad to enter the
desired value.
– To adjust the trimming width, touch [Cover Trimming Adj.]
Touch the positive/negative selection key to select positive or
negative of the adjustment value, then use the screen keypad,
upper/lower arrow keys, or the control panel keypad to enter the
desired value.
– To adjust the image position of the cover, touch [Cover Image Shift
Adj.]
Touch [Front] or [Back] to select the printed side, then [Up/Down]
or [Right/Left] to select the direction to be adjusted.
Touch the positive/negative selection key to select positive or
negative of the adjustment value, then use the screen keypad,
upper/lower arrow keys, or the control panel keypad to enter the
desired value.
– Touch [OK] to complete the setting.
10
Touch [OK] to return to the Copy Screen.
11
Select additional copy conditions, as desired.
– When making double-sided copies, select [1-2] or [2-2].
– If the original count exceeds 100, use Memory Scan mode.
12
Enter the desired print quantity from the control panel keypad.
– Proof copy is recommended before making multiple sets.
– After proof copying, the thickness of body set will be displayed on
the Perfect Binding Screen. Use this information if making any
adjustment.
12-56
Output Applications
bizhub PRO C6501