Sorting/ Stapling Copies (Finisher Fs-521) - Konica Minolta bizhub pro C6501 User Manual

Output Applications
12.3

Sorting/ Stapling Copies (Finisher FS-521)

The Finisher FS-521 has a primary (main) tray and a secondary (sub) tray,
each of which has the following output modes.
Output to the primary (main) tray
Non-sort : Non-sort mode simply means that the offset-stacker finisher
Collate
Uncollate : Uncollate mode groups together multiple copies of each original
Staple
Combined with the output modes above except staple mode, you can also
choose to output face up or face down, and output front to back or back to
front.
Non-sort
Output to the secondary (sub) tray
Non-sort/Collate: Non-sort/Collate mode outputs multiple copies of the
Uncollate
bizhub PRO C6501
modes are not selected. Copies will be stacked upon exit
without being offset by sorted sets.
: Collate mode outputs multiple copies of the original set, having
each sorted set offset by 30 mm upon exit.
and offsets the sets by 30 mm upon exit.
: Staple mode offsets and staples each sorted set.
Staple
2 staples
1 oblique
staple
original set. No offset output is available.
: Uncollate mode groups together multiple copies of each
original. No offset output is available.
Example:
Make 3 copied sets
from 4 original sheets
Collate
Offset by 30mm
12
Uncollate
Offset by 30mm
12-9