Basic Job Settings; Original Setting; Selecting Binding Direction Of The Original: Bind Direction - Konica Minolta bizhub pro C6501 User Manual

Basic Job Settings

9 Basic Job Settings
9.1

Original Setting

This section describes how to specify the original types and direction.
9.1.1

Selecting Binding Direction of the Original: Bind Direction

When copying double-sided originals in 2-1 or 2-2 mode, the copied sets will
be exactly the same in page arrangement as the originals.
Use this function to obtain the single- or double-sided copies having the
same edge as page top, from double-sided originals printed upside down on
the reverse side.
Original direction
!
Detail
See Setting Binding Direction for Duplex Copies (page 12-7) to make
double-sided copies upside down on the reverse side, using the originals
having the same edge as page top.
Prerequisites
0 Top binding is available only in 2-1 or 2-2 copy mode.
0 If the machine restores the initial setting, this function will be reset to
Right & Left binding.
0 The machine is set to match the binding direction of the original with the
binding direction of copies in Output Application setting automatically.
For details, see p. 5-20, 5-48, or 6-134 of POD Administrator's reference.
bizhub PRO C6501
2-1copying
Duplex originals
2-2copying
9
9-3