Welding Electrode Maintenance; Wheel House Arm - Pro Spot PHS-101 Instruction Manual

Battery operated dc spot welding system

Hide thumbs Also See for PHS-101:

Table of Contents

Hybrid Spot

5.5 Welding Electrode Maintenance

Fig. 1

PS-52-5/8:

Wheel House Arm

PS-1101-CM:

60mm Electrode Shank

To maintain structurally-sound welds it is important to keep your welding

electrodes clear from build-up. It is also important to maintain a 6mm weld

nugget diameter. Clean electrodes with a file and periodically replace weld-

ing caps as explained in Section 5.4 "Removing Welding Electrodes"

Also Available:

Pro Spot PLT-50/A Pneumatic Low Profile Dresser

sharpens your dull tips without having to remove the arm (Fig. 1).

WARNING! The electrodes may be hot. Use caution when handling

them.

ATTENTION! Les électrodes peuvent être chauds. Soyez prudent

lors de leur manipulation.

The wheel house adapter allows access to hard to reach areas such as

the wheel house

PS-1133-5/8:

Electrode

5 Double-Sided Welding

Page 22

Table of Contents

Hybrid spot