Fuji Xerox DocuPrint CM405 df User Manual page 393

Blank areas appear at the bottom
of each page or on other pages,
with a small strip of text at the
top.
The printer will not send or
receive faxes.
An error often occurs during a fax
transmission or reception.
The printer receive faxes, but it
does not print.
You may have chosen the wrong paper settings in the user option setting.
See also:
• "Supported Print Media" on page 139
Ensure that the region code is set correctly under
Settings → Fax Settings → Fax Line Settings → Region.
Check the Dialing Type for PB, DP(10PPS) or DP(20PPS).
Check that the cables are connected properly.
If the telephone line cord is connected to the printer via any device such as an
answering machine and a computer, remove the device and directly connect the
telephone line cord to the printer.
Reduce the modem speed under
Fax Settings → Transmission Defaults → Modem Speed.
Check the toner level.
Ensure that there is paper in the paper tray.
Ensure that Forward Settings is set to Off.
Ensure that Junk Fax Filter is set to Off.
Ensure that Secure Receive Set is set to Disable.
Execute Initialize NVM.
(System) → Tools → Admin
(System) → Tools → Admin Settings →
Troubleshooting
393