Fuji Xerox DocuPrint CM405 df User Manual page 295

• Protocols
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and then on again.
Values:
LPD
Port9100
FTP
IPP
SMB TCP/IP
SMB NetBEUI
WSD Print
WSD Scan
Network TWAIN
SNMP UDP
StatusMessenger
InternetServices
Bonjour(mDNS)
Telnet
Update Address
Book
*1
HTTP-SSL/TLS
*1
HTTP-SSL/TLS is available only when a certificate is created using CentreWare Internet Services. For details about creating a
certificate, see the Help on the CentreWare Internet Services.
NOTE:
• WSD stands for Web Services on Devices.
Disable Disables the Line Printer Daemon (LPD) port.
*
Enable Enables the LPD port.
Disable Disables the Port9100 port.
*
Enable Enables the Port9100 port.
Disable Disables FTP port.
*
Enable Enables FTP port.
Disable Disables IPP port.
*
Enable Enables IPP port.
Disable Disables SMB TCP/IP port.
*
Enable Enables SMB TCP/IP port.
Disable Disables SMB NetBEUI port.
*
Enable Enables SMB NetBEUI port.
Disable Disables WSD print.
*
Enable Enables WSD print.
Disable Disables WSD scan.
*
Enable Enables WSD scan.
Disable Disables Network TWAIN.
*
Enable Enables Network TWAIN.
Disable Disables the Simple Network Management Protocol (SNMP) UDP
port.
*
Enable Enables the SNMP UDP port.
Disable Disables the Status Messenger feature.
*
Enable Enables the Status Messenger feature.
Disable Disables an access to CentreWare Internet Services embedded in
the printer.
*
Enable Enables an access to CentreWare Internet Services embedded in
the printer.
Disable Disables Bonjour
*
Enable Enables Bonjour (mDNS).
Disable Disables Telnet.
*
Enable Enables Telnet.
Disable Disables Update Address Book.
*
Enable Enables Update Address Book.
Disable Disables HTTP-SSL/TLS.
*
Enable Enables HTTP-SSL/TLS.
®
(mDNS).
Using the Operator Panel Menus and Keypad
295