Setting Paper Sizes And Types; Setting Paper Sizes; Setting Paper Types - Fuji Xerox DocuPrint CM405 df User Manual

Setting Paper Sizes and Types

When loading print media in the tray, set the paper size and type on the operator panel before printing.
See also:
• "Understanding the Printer Menus" on page 280
This section includes:
• "Setting Paper Sizes" on page 151
• "Setting Paper Types" on page 151
 Setting Paper Sizes
1
On the operator panel, press the
2
Select the Tools tab, and then select Tray Management.
3
Select Tray Settings.
4
Select the desired tray.
NOTE:
• When you select Bypass Tray, the Use Driver Settings for Print Job check box is selected by default. To
change the setting, clear the check box.
5
Select Size.
6
Select the desired paper size.
7
Select OK.
 Setting Paper Types
IMPORTANT:
• Paper type settings must match those of the actual print media loaded in the tray or the feeder. Otherwise, print-quality
problems can occur.
1
On the operator panel, press the
2
Select the Tools tab, and then select Tray Management.
3
Select Tray Settings.
4
Select the desired tray.
NOTE:
• When you select Bypass Tray, the Use Driver Settings for Print Job check box is selected by default. To
change the setting, clear the check box.
5
Select Type.
6
Select the desired paper type.
7
Select OK.
(System) button.
(System) button.
151
Printing Basics