Fuji Xerox DocuPrint CM405 df User Manual page 403

031-578 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check if login name
(user name) and password are correct.
031-579 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check if storage
location is correct.
031-580 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check server
access right.
031-581 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Change file name
and forwarding destination folder, or move or delete file in forwarding destination folder.
031-582 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check if the file
name you specified can be created in storage location. Check if storage location has free space.
031-584 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check if the folder
name you specified can be created in storage location. Check if the folder that has the same name as
the one you specified already exists.
031-585 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check server
access rights.
031-587
031-588 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check if storage
location has free space.
031-590 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Set other than
"Cancel" for processing in the case of file name duplication, or change/delete file name the same as the
one specified in sending destination folder.
031-594 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Try the same
operation again. Contact customer support if this failure is repeated.
031-595
031-598 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check append
access right to the file and if server supports the FTP append command.
031-599 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check rename
access right to the file. Check if server supports the FTP rename command.
033-513 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Try the following:
• Print the received fax, or wait for a while until sending a fax is completed.
• Print the fax job stored using the Secure Receive feature.
NOTE:
• For more information on the Secure Receive feature, see
page 270
033-762 Select Close, or wait for the time set in Fault Timeout for the printer to recover. The printer rejects
faxes sent from unwanted numbers.
See also:
• "Junk Fax Filter" on page 300
033-788 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Try the following:
• Remove the received fax, or wait for a while until sending a fax is completed.
• Print the fax job stored using the Secure Receive feature.
NOTE:
• For more information on the Secure Receive feature, see
page 270
034-515 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Try the following:
• Try the same operation.
• Check the printer or remote machine if the memory is full.
034-791 Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check if the
telephone line cord is connected properly. If the line connection is correct, check the following:
• If tone/pulse setting is correct.
NOTE:
• For more information on tone/pulse setting, see
If tone/pulse setting is correct, check the following:
• If the remote machine can receive a fax.
.
.
"Using the Secure Receiving Mode" on
"Using the Secure Receiving Mode" on
.
"Dial Type" on page 302
Troubleshooting
403