Receiving A Fax; About Receiving Modes; Loading Paper For Receiving Faxes; Receiving A Fax Automatically In The Fax Mode - Fuji Xerox DocuPrint CM405 df User Manual

Receiving a Fax

This section includes:
• "About Receiving Modes" on page 262
• "Loading Paper for Receiving Faxes" on page 262
• "Receiving a Fax Automatically in the FAX Mode" on page 262
• "Receiving a Fax Manually in the TEL Mode" on page 262
• "Receiving a Fax Automatically in the TEL/FAX Mode or Ans/FAX Mode" on page 263
• "Receiving a Fax Manually Using an External Telephone" on page 263
• "Receiving Faxes Using the DRPD Mode" on page 263
• "Receiving Faxes in the Memory" on page 264
• "Polling Receive" on page 264

 About Receiving Modes

NOTE:
• To use the TEL/FAX Mode or Ans/FAX Mode, connect an external telephone or answering machine to the phone connector
( ) on the rear of your printer.
When the memory is full, you cannot receive a fax automatically. Use an external telephone to receive a fax
manually.
See also:
• "Receiving a Fax Manually Using an External Telephone" on page 263

 Loading Paper for Receiving Faxes

The instructions for loading paper in the paper tray are the same whether you are printing, faxing, or copying, except
that faxes can only be printed on Letter-sized, A4-sized, or Legal-sized paper.
See also:
• "Loading Print Media" on page 143
• "Setting Paper Sizes and Types" on page 151

 Receiving a Fax Automatically in the FAX Mode

Your printer is preset to the FAX Mode at the factory.
If you receive a fax, the printer automatically goes into the FAX Mode after a specified period of time and receives
the fax.
To change the interval at which the printer goes into the FAX Mode after receiving an incoming call, see
Fax Settings Options" on page

 Receiving a Fax Manually in the TEL Mode

You can receive a fax by picking up the handset of the external telephone and then pressing the remote receive
code (see "Available Fax Settings Options" on page
hear voice or fax tones from the remote machine) and then pressing the
The printer begins receiving a fax and returns to the standby mode when the reception is completed.
262
Faxing
273.
273), or by selecting Manual Receive in OnHook (you can
(Start) button.
"Available