• Reset Transfer Unit
Purpose:
To initialize the life counter of the transfer unit. After replacing the transfer unit, be sure to initialize its life counter.
Value:
Initialize
• Clear Storage
NOTE:
•
Clear Storage feature is available only when the optional 512MB memory or the hard disk unit is installed.
Purpose:
To clear all files stored as Secure Print and Sample Print in the RAM Disk or the hard disk unit.
Values:
All
Secure Print
Sample Print
• Format Hard Disk
NOTE:
•
Format Hard Disk feature is available only when the hard disk unit is installed.
Purpose:
To initialize the hard disk unit.
• Non-Genuine Toner
Purpose:
To use toner cartridge of another manufacturer.
NOTE:
•
Using a non-Fuji Xerox toner cartridge may severely damage your printer. The warranty does not cover damages caused by
using non-Fuji Xerox toner cartridges.
Values:
*
Off
On
Initializes the transfer unit counter.
Deletes all files stored as Secure Print and Sample Print in the RAM Disk or the hard disk
unit.
Deletes all files stored as Secure Print in the RAM Disk or the hard disk unit.
Deletes all files stored as Sample Print in the RAM Disk or the hard disk unit.
Does not use toner cartridge of another manufacturer.
Uses toner cartridge of another manufacturer.
Using the Operator Panel Menus and Keypad
315