Usb Connection; Wireless Network Connection - Fuji Xerox DocuPrint CM405 df User Manual

USB Connection

A local printer is directly connected to your computer using the USB cable. If your printer is connected to a network
instead of your computer, skip this section and go to
To connect the printer to a computer:
1
Connect the smaller USB connector into the USB port on the rear of the printer, and the other end of the cable
into a USB port of the computer.
NOTE:
• Ensure that you match the USB symbol on the cable to the USB symbol on the printer.
• Do not connect the printer USB cable to the USB port available on the keyboard.
Wired Network Connection
To connect the printer to a network:
1
Connect one end of the Ethernet cable into the Ethernet port on the rear of the printer, and the other end to a
LAN drop or hub.

Wireless Network Connection

To set up a wireless connection, insert the optional wireless printer adapter into the wireless adapter socket on the
rear of the printer. For details about wireless connection, see
page 67.
NOTE:
• To use the wireless printer adapter, be sure to disconnect the Ethernet cable.
"Wired Network Connection" on page
"Installing the Optional Wireless Printer Adapter" on
Printer Connection and Software Installation
93.
93