035-701
Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check the
following:
NOTE:
•
035-702
Select Close, or wait for the time set in Fault Timeout for the printer to recover. Try the same
operation.
035-708
Select Close, or wait for the time set in Fault Timeout for the printer to recover. Try the following:
NOTE:
•
035-717
Select Close, or wait for the time set in Fault Timeout for the printer to recover. Reduce the modem
speed.
NOTE:
•
035-718
Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check the status of
the remote machine.
035-720
Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check the features
of the remote machine.
035-781
Select Close, or wait for the time set in Fault Timeout for the printer to recover. Check if the remote
machine is busy.
042-700
Wait for a while until the printer cools down.
077-215
Turn off the printer. Confirm that the duplexer is correctly installed, and turn on the printer. Contact
customer support if this failure is repeated.
093-925
Turn off the printer. Confirm the black toner cartridge is correctly installed, and turn on the printer.
093-950
Turn off the printer. Confirm the yellow toner cartridge is correctly installed, and turn on the printer.
093-951
Turn off the printer. Confirm the magenta toner cartridge is correctly installed, and turn on the printer.
093-952
Turn off the printer. Confirm the cyan toner cartridge is correctly installed, and turn on the printer.
116-316
Turn off the printer. Remove the optional 512MB memory from the slot, and then reattach it firmly. Turn
on the printer. Contact customer support if this failure is repeated.
116-317
Turn off the printer, and turn it on again. Contact customer support if this failure is repeated.
116-320
Remove the unsupported additional memory module. Contact customer support if this failure is
repeated.
116-721
Select Close, or wait for the time set in Fault Timeout for the printer to recover.
116-722
117-361
Turn off the printer, and turn it on again. Contact customer support if this failure is repeated.
404
Troubleshooting
•
Status of the remote machine
•
tone/pulse setting
For more information on tone/pulse setting, see
•
Try the same operation.
•
Reduce the modem speed.
For more information on modem speed, see
For more information on modem speed, see
"Dial Type" on page 302
"Modem Speed" on page 303
"Modem Speed" on page 303
.
.
.