Scanning From the Operator Panel - WSD Scan
If the printer is connected to a computer via network using WSD (Web Services on Devices), you can use the WSD
Scan function to send scanned images to a computer.
The following procedure uses Windows 7 as an example.
NOTE:
•
To use WSD Scan, you need to setup connection using WSD.
•
WSD is supported only on Windows Vista
Printer Setup for WSD Scan
Setup the printer and computer for connection using WSD.
• Checking the Printer Setting
To use the WSD Scan function, WSD Scan needs to be set to Enable. For details,
• Setting Up the Computer
For Windows 7:
1
Click Start
Computer
→
2
Right-click the icon for the printer, and then click Install.
The printer is connected using WSD.
For Windows Vista:
1
Click Start
Network.
→
2
Right-click the icon for the printer, and then click Install.
3
Click Continue.
The printer is connected using WSD.
Procedures for WSD Scan
1
Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the DADF" on page 193
• "Making Copies From the Document Glass" on page 191
2
Press the
(Services) button.
3
Select Scan to.
4
Select WSD.
5
Select
until the desired computer you want to send the scan job to appears, and then select that computer.
6
Select Event, and specify the type of scan such as Scan, Scan To Print and Scan To E-mail.
7
Press the
(Start) button to begin sending the scanned file.
210
Scanning
®
and Windows 7.
Network.
→
"Protocols" on page
295.