Fuji Xerox DocuPrint CM405 df User Manual page 234

To fill in the fields, enter the information as follows:
1 Name
2 Server Type
3 Computer Settings
wizard
4 Server Name / IP
Address
5 Share Name
6 Path
7 Login Name
8 Login Password
9 Confirm Login
Password
10 Port Number
After you configured settings, go to
234
Scanning
Enter a friendly name that you want it to appear on the address book.
Select Computer (SMB) if you store the document in a shared folder of your
computer.
Select Server (FTP) if you use an FTP server.
Clicking this button opens the wizard screen which guides you through several
steps.
When you complete the steps in the wizard, the settings for Server Address are
automatically configured.
Enter a server name or IP address of your computer or the FTP server that you have
shared out.
The following are examples:
• For Computer (SMB):
Server name: myhost
IP address: 192.168.1.100
• For Server (FTP):
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address: 192.168.1.100
Enter the name of the shared folder on the recipient computer. For SMB only.
For Computer (SMB)
To store the scanned document in the shared folder directly without creating any
subfolder, leave the space blank.
To store the scanned document in the folder you created under the shared folder,
enter the path as following.
Example: Share Folder name: MyShare, Second-level folder name: MyPic,
Third-level folder name: John
You should now see MyShare\MyPic\John in your directory.
MyShare (Share folder)
MyPic
John
In this case, enter the following item.
Path: \MyPic\John
For Server (FTP)
Enter the path to store the scanned document.
Enter the user account name that has access to the shared folder on your computer
or FTP server.
Enter the password corresponding to the above login name.
NOTE:
• Empty password is not valid in the Scan to Computer feature. Ensure that you
have a valid password for the user login account. (See
and a Password (SMB Only)" on page 218
in your user login account).
Re-enter your password.
Enter the port number. If you are unsure, you can enter the default value of 139 for
SMB and 21 for FTP.
"Sending the Scanned File on the Network" on page
"Setting a Login Name
for details on how to add a password
235.