Display Brightness; Date & Time - Fuji Xerox DocuPrint CM405 df User Manual

Date & Time
Purpose:
To specify the date and time formats.
Values:
Time Zone
Date
Format
Time
Format
Measurements
Purpose:
To specify the default measurement unit displayed after the numeric value on the operator panel.
Values:
Millimeters(mm)
Inches(")
NOTE:
• The default for Measurements varies depending on other settings, such as Region and Document Size.

Display Brightness

Purpose:
To adjust the screen brightness of the LCD panel.
Values:
*
5
1-10
Audio
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message appears.
Values:
Panel Select Tone
Panel Alert Tone
YYYY / MM / DD
DD / MM / YYYY
MM / DD / YYYY
12 Hour
24 Hour
*
Selects millimeter as the default measurement unit.
Selects inch as the default measurement unit.
Sets the brightness in 10 levels, with 10 being the brightest.
*
Off Does not emit a tone when the operator panel input is correct.
Soft Emits a tone when the operator panel entry is correct.
Normal
Loud
*
Off Does not emit a tone when the operator panel entry is incorrect.
Soft Emits a tone when the operator panel entry is incorrect.
Normal
Loud
Sets the time zone.
Sets the date depending on the Format settings.
Sets the date format.
*
Sets the time.
Sets the time in 12-hour format.
Sets the time in 24-hour format.
Using the Operator Panel Menus and Keypad
305