Delayed Send - Fuji Xerox DocuPrint CM225FW User Manual

• Resolution
Purpose:
To specify the resolution level to be used for fax transmission.
Values:
Standard*
Fine
Super Fine
Ultra Fine
NOTE:
• Faxes scanned in the Super Fine mode transmit at the highest resolution supported by the receiving device.
• Original Type
Purpose:
To select the default document type.
Values:
Text*
Photo
• Lighten / Darken
Purpose:
To set the default copy density level.
Values:
Lighten2
Lighten1
Normal*
Darken1
Darken2

• Delayed Send

Purpose:
To set a specific time for the fax transmission to start. Once the Delayed Send is activated, your printer stores all of
the documents to be faxed into its memory and sends them at the specified time. After faxing in the Delayed Send
mode is complete, the data in the memory is cleared.
Values:
Hours
Minutes
Suitable for documents with normal sized characters.
Suitable for documents containing small characters or thin lines or documents
printed using a dot-matrix printer.
Suitable for documents containing extremely fine detail. The Super Fine mode
is enabled only if the receiving device also supports the super fine resolution. See
the notes below.
Suitable for documents containing photographic images.
Suitable for documents with text.
Suitable for documents with photos.
Makes the fax lighter than the original. Works well with dark print.
Works well with standard typed or printed documents.
Makes the fax darker than the original. Works well with light print or faint pencil
markings.
Specifies the fax transmission start time when sending a fax at a specified time.
Using the Operator Panel Menus and Keypad 243