Banner Sheet; Substitute Tray - Fuji Xerox DocuPrint CM405 df User Manual

Banner Sheet

NOTE:
• Banner Sheet feature is available only when the optional 550 sheet feeder is installed on the printer.
Purpose:
To specify the position of banner sheet, and also specify the tray in which the banner sheet is loaded.
Values:
Insert Position
Specify Tray

Substitute Tray

Purpose:
Specifies whether to use paper of a different size when the paper that is loaded in the specified tray does not match
the paper size settings for the current job.
Values:
*
Off
Larger Size
Nearest Size
Use Bypass Tray
Letterhead 2 Sided
Purpose:
To specify whether to print on both sides when using letterhead.
Values:
*
Disable
Enable
310
Using the Operator Panel Menus and Keypad
*
Off
Front
Back
Front & Back
Bypass Tray
*
Tray1
Tray2
No tray size substitute accepted.
Substitutes paper of next largest size. When there is no larger paper size, the
printer substitutes paper of nearest size.
Substitutes paper of nearest size.
Substitutes paper from the bypass tray.
Does not print on both sides of letterhead.
Prints on both sides of letterhead.
Does not print the banner sheet.
Inserted before the first page of every copy.
Inserted after the last page of every copy.
Inserted before the first page of every copy and after the last
page of every copy.
The banner sheet is loaded in the bypass tray.
The banner sheet is loaded in the standard 550 sheet tray.
The banner sheet is loaded in the optional 550 sheet feeder.